I have a Uberti 44-40 Smokewagon that will be here Monday.I have ordered Starline brass,RCBS Cowboy dies and RCBS 200 grain cowboy bullet mould. what powders are would you recommend or have experience with? Anybody use Trail boss?
I have a Uberti 44-40 Smokewagon that will be here Monday.I have ordered Starline brass,RCBS Cowboy dies and RCBS 200 grain cowboy bullet mould. what powders are would you recommend or have experience with? Anybody use Trail boss?
Holy black!!
Win 231 with that boolit or Universal Clays have worked well for me. The latter shoots much cleaner. GF
Red Dot, 5.5 grains, 200 grain boolit equals much good.
_________________________________________________It's not that I can't spell: it is that I can't type.
Unique works very well in my.45 Colt, 200 grain LRNFP.
6 grains of Bullseye or TiteGroup also shoot well. Both are also safe in the 1873 Winchester as long as you exercise care to avoid inadvertent double-charges. I charge cases a block of 50 at a time and check with a penlight. If unable to so this, the Red Dot suggestion above is best IF you have a powder measure able to meter its larger particle size uniformly and accurately.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
5.2 gr of clay dot with a 200 gr works in my original .44-40 1873 musket. Don’t have a .44-40 revolver so I can’t help you there. Start low and work up until the load, the way you sight, shoot and hold your revolver put the poa and the poi at the same spot. Have fun.
I vote for Unique too. I use that in mine and am happy with it.
KE4GWE - - - - - - Colt 1860, it just feels right.
I use unique in my .45colt,.44-40 and .38-40. unique is also my go to powder in lite .44 mag .41mag .38 spl. .357 9mm 9mm largo and many more.
Knowledge I take to my grave is wasted.
I prefer to use cartridges born before I was.
Success doesn't make me happy, being happy is what allows me to be successful.
I used Unique also. Trail Boss is one also to consider. Your gonna love that ol .44. james
Vectan A1 has about the same burn rate as unique but much cleaner burning could try that if you can get it
I have never tried any of the Vectan powder but I might give it a try. And yes, Unique does burn dirty. Very useful but dirty. james
I got a can 1.1lb of the faster vectan AS a while back it burn rate is in the infield ballpark range of tight group but much cleaner as the cases are brass collared and almost look like they were wire brushed after fireing in my 9mm just started using A1 for some 158gr swc in the 9mm very clean to also use a light loading around 5gr of AS in 44mag with 128gr 440 round ball sized 430 for a nice slow 750fps light plinker but clean
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |