A friend asked if I could load for a 25-20 Maynard. I'm sure I could if I had some data on it. Any of you know of how much and what to use?
A friend asked if I could load for a 25-20 Maynard. I'm sure I could if I had some data on it. Any of you know of how much and what to use?
It should just be a 25/20 Single shot. Maynard was the 1st commercial rifle chambered in this round. It probably has a 15" twist so 75 grain bullets may work best. Use lead bullets only due to the steel used in barrels of the time.
If you want to go the whole distance contact Dave Davidson at CH4D. Go to their website and look at the list of dies they offer.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |