Can anyone tell me the O-ring thickness and O.D for the one that goes on the bottom of the press? Between the press and your bench.
Best place to buy replacements? Lyman? Some big box local store?
Thanks again guys.
Waco
Can anyone tell me the O-ring thickness and O.D for the one that goes on the bottom of the press? Between the press and your bench.
Best place to buy replacements? Lyman? Some big box local store?
Thanks again guys.
Waco
The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
Proverbs 1:7
I just went down to the local hardware store that had a wall display of 'O' rings and matched it up.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
#15 '0' ring
Luber/sizer Lyman & RCBS 014= ½” ID by 1/16” thick
Lyman 450 bottom o-ring 023= 1 1/16” ID by 1/16” thick
Lyman 450 double plunger o-rings 212= 7/8” ID by 1/8” thick
I got some at ACE in the plumbing department.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |