I知 loading for a savage 23b using 32-20 brass formed to 25-20 and have been getting quite a few split necks. I知 hoping a neck sizer and some actual 25-20 brass might help.
Thanks
I知 loading for a savage 23b using 32-20 brass formed to 25-20 and have been getting quite a few split necks. I知 hoping a neck sizer and some actual 25-20 brass might help.
Thanks
Not being familiar with the rifle, is this .25-20 singleshot or .25-20 Winchester?
I have some .25-20 Winchester brass if the latter.
25-20 Winchester Centerfire
Have you tried annealing the brass? Also, set your sizing die to partially size the necks.
I have a C-H 25-20 Neck Sizer that has never been used but is in its original old box for $20 plus actual shipping.
Just let me know
gmsharps
Pm sent
Found everything thanks
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |