I set mine up with one e clip per pin . My first run I’m running 3 cavities with no hp and one with the penta . My alloy is 1 coww: 2 pure led
Sent from my iPhone using Tapatalk
I set mine up with one e clip per pin . My first run I’m running 3 cavities with no hp and one with the penta . My alloy is 1 coww: 2 pure led
Sent from my iPhone using Tapatalk
Where do the clips go?
When you care enough to send the very best, send an ounce of lead.
Where do the clips go?
When you care enough to send the very best, send an ounce of lead.
You only need one clip per pin. The upper one can be knocked off by the handle. I run different pins only on initial run so I can take weight measurements. After that it’s one style as I’ve had nose fill out issues otherwise. Have the same MP mood but use the NOE version more. It rains bullets while I have intermittent sticking issues w/ the MP. i use the plug pins and know using one of the HP pins would alleviate this issue.
In the slot on the pin posts.
Thanks
When you care enough to send the very best, send an ounce of lead.
Here ya go brewer
Sent from my iPhone using Tapatalk
Ah, so the clips up ps are the spacers to keep the pins in the right spot.
When you care enough to send the very best, send an ounce of lead.
The clips prevent the pins from essentially falling out of the blocks. They provide a positive stop.
I ran one penta pin and 3 blanks these are the HP. The powder is smokes clear . The bucket I tumble in used to be for smokes traffic orange that’s why there are orange spots. I’m going to run them through my 358 lee sizer die and put them on some 358 win brass . I’ve got the Lyman cast number four but , what load do you guys like ?
Sent from my iPhone using Tapatalk
green ones are the blank pin Eastwood powder mirror green
I never got a bill for mine yet. When did you get yours?
Anyone who got the gas check version want to trade me for some of my plain base boolits ?
Sent from my iPhone using Tapatalk
I just paid my invoice I received a few weeks ago for my GC, hp, 2 cavity, brass mold with all pins, and handles. How long dose it take to get it from the other side of the world?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |