.30/30 with 34" barrel. Am I out to lunch?

[Tom W.]

I wonder how many people it took to carry it to the bench......

[Texas by God]

More than a few years back I worked for a smith that was making single shot 50 BMGs. He was getting some of his barrels from Orion barrel company. He got an oder in for a 3" diameter barrel that was 60" long and Jerry did it. The finished rifle weighed 165 ( if I remember right) pounds and shooting off the bench was like shooting a 22LR. but with much more knock down power.

Wow! Did it get 3000 + fps with that length?

[John Taylor]

Wow! Did it get 3000 + fps with that length?

Many of the rifle were 36" to 48" barrel length. We were making lathe turned bullets out of brass that weighed 615 grain and we were getting 3400 FPS. Had an old automatic screw machine that was making bullets, very noisy chain drive but it would spit out a bullet about every 3 seconds. At the time Barns was the only one making a 50 cal bullet and it was a round nose. Military bullets had the core off center for the "cone of fire" from a machine gun. We were making pointed boat tail.

[M-Tecs]

I would think that the bullet holding enough lube at that length would become an issue????

[scattershot]

I like the 30/30. And long barrels. And the Sharps. Sounds like a win/win/win situation to me.

[John Taylor]

I would think that the bullet holding enough lube at that length would become an issue????

We had trouble with the last 8" of bore picking up metal, ended up coating the bore and bullets with triflow teflon coating. This gave an extra 100 feet per second and eliminated the metal fouling.