WTB 357 sig brass

[AKholicBubba]

Just getting into this cartridge. Need to build up a brass stash. If anyone has any laying around they don't need, let me know what you got and how much you want for it. Cash or maybe trade for some 40sw or 308win or 38 special, or...

Sent from my LG-LS777 using Tapatalk

[jetsfan-24]

I have a few hundred i,ll pm u 2mowwo

[Bmi48219]

I have 460 pieces once fired, pm sent.

[sagamore-one]

I ran into some CCI brass that had really small flash holes . If you experience trouble de-capping check out size of flash hole and diameter of de-capping pin. I ended up polishing pin on de-capper to a smaller diameter .

[cwlongshot]

I ran into some CCI brass that had really small flash holes . If you experience trouble de-capping check out size of flash hole and diameter of de-capping pin. I ended up polishing pin on de-capper to a smaller diameter .

I was just gonna post this!!

I use a Mighty Armory de-priming tool, ( https://www.mightyarmory.com/ ) but if your dies have a decaping pin with a "head" on them you may be OK just punching them out to .080 as a std. If you use the "pin" style de cap pins, its aggravating as the pins WILL get pulled out of the stem... (Why I take the extra step of universal De Priming them on the mighty)

Speer did this to help with flattened primers and nervous nellies with the cartridge when it was new.

I punch them out to .080 and load some pretty hot with ZERO problems from doing so.

CW

[army_doc]

I have some 357 Sig brass you can have. There is maybe 20-30 pieces. Just pay shipping ($2)

[Latheman]

I have at least 1000. Willing to trade for projectiles.

[j p sixguns welldone]

I have maybe 300 or more remington once fired.