Titan ReloadingRepackboxInline FabricationLee Precision
Reloading EverythingMidSouth Shooters SupplyRotoMetals2Load Data
Wideners
Results 1 to 20 of 20

Thread: 45-70 velocity question

  1. #1
    Boolit Buddy
    Join Date
    Oct 2013
    Posts
    452

    45-70 velocity question

    My question is how low can you go in velocity and still get good terminal performance? I know it depends some on bullet and distance, so I can answer those questions. Bullet is from the Accurate 46-415v mold which weighs 420 grains after powdercoat and gas check. It does have a nice .37 inch meplat. Intended game is deer and maybe black bear at ranges under 125 yards. I am currently looking at the 1150-1200 fps range. Sufficient, or lacking?

  2. #2
    Moderator


    Winger Ed.'s Avatar
    Join Date
    May 2007
    Location
    Just outside Gun Barrel City, Texas
    Posts
    9,480
    The most 'pleasant' loads I've fired a 420gr. from my Marlin CB clocked about 1350 fps.
    Which is pretty close to the old original BP loads.
    Its not punishing to shoot, good accuracy, and these small Texas deer at 80-100 yards- it knocks 'em for a loop.
    In school: We learn lessons, and are given tests.
    In life: We are given tests, and learn lessons.


    OK People. Enough of this idle chit-chat.
    This ain't your Grandma's sewing circle.
    EVERYONE!
    Back to your oars. The Captain wants to waterski.

  3. #3
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    The U.S. Army 55-grain blackpowder carbine load with 405-grain bullet produced about 1100 fps from a 26-inch barrel.
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  4. #4
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    14,455
    Your 420 grn bullet at 1150-1200 fps is ahead of a 44 mag energy wise. Should also be more penetration. The original 400 grn 45-70 at 1150 - 1200fps was a stellar performer at extended ranges even. Millions of buffalo couldn't be wrong.

    Put together a good accurate load in that velocity range. one that perfoms well over 3-4 testing sessions. Then don't look back, place your shots as best you can. Ill bet any well placed hit dosnt travel more than a few yards

  5. #5
    Boolit Grand Master

    Join Date
    Oct 2009
    Location
    England,Ar
    Posts
    7,687
    I agree with the 1100-1300 fps range. Recoil starts getting noticeable above 1500. Really noticeable when you approach 2000.

  6. #6
    Boolit Buddy MrHarmless's Avatar
    Join Date
    Aug 2018
    Location
    Oklahoma
    Posts
    236
    Good form on the bench behooves you above ~1500 FPS. I leaned way too "into" my first few.

  7. #7
    Boolit Master brewer12345's Avatar
    Join Date
    Sep 2017
    Location
    Denver Metro Area
    Posts
    1,266
    Its almost an ounce of lead with a huge meplat and a diameter that equals what many jacketed loads get to after expansion. All you have to do is get reasonable accuracy at you intended range and that freight train of a boolit will knock down deer, bears and hogs. Probably go end to end on any of them.
    When you care enough to send the very best, send an ounce of lead.

  8. #8
    Boolit Buddy

    oconeedan's Avatar
    Join Date
    Jan 2019
    Location
    Lake Oconee Ga
    Posts
    319
    I have shot many deer with a slow moving 45-70, all cast 405gr, around 1200fps. I haven't had a deer stop one yet.
    It works very well, but keep in mind that a double lung shot won't drop them fast. I have tracked one around 100 yds before, with little blood trail (fat clogged up holes). She was dead but didn't know it.
    Any hit in the shoulder will drop them on the spot usually. Dan

  9. #9
    Boolit Master murf205's Avatar
    Join Date
    Sep 2011
    Location
    Dead center of Alabama
    Posts
    2,366
    It's PLENTY powerful! The most important thing is for you to shoot the rifle with the load you settle on at the intended range so you KNOW where it hits at what range. If you stuff one of these boolits in the right spot all you will need is a sharp skinning knife after that.
    IT AINT what ya shoot--its how ya shoot it. NONE of us are as smart as ALL of us!

  10. #10
    Boolit Buddy
    Join Date
    Dec 2012
    Posts
    294
    You are good to go with that bullet and velocity. Just don't cast them too soft. 20-1 or 30-1 works just fine. I have taken quite a few deer and hogs with a very similar set up. Hit them in the right place, and they won't go far. A deer won't hold that bullet with a hit from any angle.

  11. #11
    Boolit Master brewer12345's Avatar
    Join Date
    Sep 2017
    Location
    Denver Metro Area
    Posts
    1,266
    You are killing me, by the way. I don't really "need" a 45/70, especially since I have a 44 mag lever I really have not wrung everything out of yet. That said, boy do I want a Henry single shot 45/70 to play with.
    When you care enough to send the very best, send an ounce of lead.

  12. #12
    Boolit Master pertnear's Avatar
    Join Date
    Dec 2014
    Location
    Heart of Texas
    Posts
    661
    I've never shot a bear, but I can pretty much guarantee a .45 cal lead slug weighing 420 gr started at 1,200 fps, inside 125 yds will glide right through a deer & leave a good bleeding hole both coming & going!
    Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.

  13. #13
    Boolit Buddy
    Join Date
    Aug 2005
    Location
    Allen, TX
    Posts
    345
    Given the number of deer I've killed with .45 Auto Rim loads using 240 or 250 SWCs at 900, I'd say that .45/70 at 1100 with much more bullet mass is a no brainer. The pistol loads shoot completely through deer, side to side or lengthwise. It's perhaps not apparent to everybody, but a .45 caliber, large meplat bullet of decent mass with very moderate velocity has killed and will kill anything in North America without much drama.
    Colt's Manufacturing Company Armorer Instructor
    Aimpoint USA L/E Pro Staff
    Co-owner Hardwired Tactical Shooting (HiTS)

  14. #14
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    10,158
    Firing Table for .45-70 Black Powder (55 grains) "Carbine" Load 405-grain bullet.

    .45-70 Government, Lead FP, 405gr, 55 grs. 2Fg, 26-inch barrel Trap-Door Carbine, issue sights.

    Yds__Drop(ins.)___FPS______Ft.-Lbs
    0____-0.9652____1080_____1049
    25___3.3053_____1055_____1001
    50___5.6252_____1033______959
    75___5.9094_____1013______923__Max. bullet rise 6"
    100__4.0752______994______888__Zero 4 inches high at 100 yards
    125__0.0416______977______858__Point of Aim = Point of Impact 125 yards
    150__-6.2706_____960______829__Point Blank Range 150 yards with max. 6 inch drop
    175__-14.9393____945______803
    200__-26.0414____930______778__Head hold for torso hit at 200 yards
    225__-39.6529____917______756
    250__-55.8497____904______735__Hold a man's height high beyond 200 yards, H&I repel boarders

    Beyond 250 yards set slider on raised rear sight ladder to known range.
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  15. #15
    Boolit Master
    Join Date
    May 2016
    Location
    Denmark (a greasy little spot in Scandinavia)
    Posts
    815
    Veral Smith said it best when he said:
    Meplat 70% or better is optimum.
    Speed at hit between 1400 and 1700fps.
    That ballances for optimum penetration and best secondary cavity.

  16. #16
    Boolit Grand Master


    GregLaROCHE's Avatar
    Join Date
    Feb 2018
    Location
    Southern France by way of Interior Bush Alaska
    Posts
    5,286
    It should be fine. It’s not the speed that counts with a .45-70, it’s the weight of all that lead.

  17. #17
    Boolit Master
    Join Date
    Jun 2010
    Location
    WNY
    Posts
    2,502
    Quote Originally Posted by brewer12345 View Post
    Its almost an ounce of lead with a huge meplat and a diameter that equals what many jacketed loads get to after expansion. All you have to do is get reasonable accuracy at you intended range and that freight train of a boolit will knock down deer, bears and hogs. Probably go end to end on any of them.
    Says it all.

  18. #18
    Boolit Master pls1911's Avatar
    Join Date
    Feb 2008
    Location
    CowTown... PantherCity... Texas
    Posts
    1,107
    Daylight transfer is a wonderful measure, and a lead slug measuring .458 leaves lots of it.

    Any velocity 1200 to 1500 fps will kill effectively inside any range where you can properly place your shot.
    Salvaging old Marlins is not a pasttime...it's a passion

  19. #19
    Boolit Master redhawk0's Avatar
    Join Date
    Apr 2016
    Location
    North East, USA
    Posts
    1,419
    Just as a reference...I only shoot a 340gr boolit at 1200-1250fps....It makes a 1/2" hole in and about 2" coming out of a whitetail. If you are throwing an additional 80gr above mine, at the same speed....you shouldn't have any problems.

    redhawk

    The only stupid question...is the unasked one.
    Not all who wander....are lost.
    "Common Sense" is like a flower. It doesn't grow in everyone's garden.

    If more government is the answer, then it was a really stupid question. - Ronald Reagan

  20. #20
    Boolit Master
    Join Date
    Mar 2013
    Location
    Moorhead, MN
    Posts
    688
    I have shot a "bear" (too small to count) and a few deer ( one really heavy) with my 45-70 using both cast and jacketed bullets. My Marlin 1895 is loaded for bear with the first two rounds being Remington Core Lok 400gr @ about 1300fps. The third is a cast SWC above 38.5 gr IMR 3031 (factory equivalent according to an old Lyman reloading manual) which should penetrate a black bear end-to-end. The last two rounds are Buffalo Bore because if three 400 gr bullets haven't done the job, I'm in need of a trouble-ender. I should have enough preference points to get a black bear license in northern MN this year. That's where a friend got a 408# bear a few years ago.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check