StainLess Steel MediaInline FabricationWidenersRotoMetals2
RepackboxGraf & Sons

Page 2 of 2 FirstFirst 12
Results 21 to 21 of 21

Thread: Need some sabot knowledge

  1. #21
    Boolit Buddy arcticap's Avatar
    Join Date
    Oct 2008
    Location
    Central Connecticut
    Posts
    211
    Here's an short interesting article with a few useful facts:

    How to Select the Right Sabot --->>> https://www.chuckhawks.com/select_right_sabot.htm

    "Barnes MZ-Expanders come automatically with MMP 50 / 452 Black HPH12 long-petaled sabots in 250 and 300 grain. Here again, while as supplied may load and shoot beautifully for you, if they load unbearably tight, all is not lost. Just substitute MMP 50 / 452 Black HPH-24 sabots. The HPH-24 Black sabots give you a smaller assembled OD of about .002 inches less than the HPH-12 sabots, and that is a whole heck of a lot to a sabot. The example MMP gives is with a .452" bullet: HPH-12 = .507 - .508" assembled OD, HPH-24 = .505 - .506" assembled outside diameter.

    Though I'm not a fan of the Hornady SST muzzleloading bullet (Thompson "Shockwave"), if you are shooting the 250 SST or 300 SST, the HPH-12 is generally the choice. If it loads too tight the HPH-24 can solve your problems."

    Then the 3petalEZ sabot from MMP is even slightly smaller in diameter.
    Having only 3 petals makes it possible to make the petals thinner than having more petals.

    But most inline rifles have very shallow rifling without much extra room to hold left over powder fouling.

    Here's 2 photo range reports of someone shooting a new Knight Ultra Light Nitride rifle with MMP HPH-24 sabots and 120 grains of Black Horn 209 powder.

    2nd report:--->>> https://www.huntingnet.com/forum/bla...ml#post4350495

    1st report:--->>> https://www.huntingnet.com/forum/bla...t-nitride.html
    Last edited by arcticap; Yesterday at 11:09 PM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check