Brazilian CBC 151 Ejector

[Dieselhorses]

If anyone owns one of these (Brazilian single-shot 12 gauge model 151), could you tell me if this pic reflects the correct orientation of the auto-ejector? In this position the ejector is all the way in. I have the plunger & plunger spring. Has to seat in that notch and rotates down to push ejector outwards. There 2 stop pins that grace both sides where spring is supposed to seat against. My MAIN question would be is there a trick to getting the spring and plunger in without it taking someone's
eye out?
Attachment 233742

[Texas by God]

Does your shotgun have the opening lever in front of the trigger? If so I can look at one my Dad carries every day on his mule. A side and rear view pics will help also. Good guns IME.

[Dieselhorses]

Does your shotgun have the opening lever in front of the trigger? If so I can look at one my Dad carries every day on his mule. A side and rear view pics will help also. Good guns IME.

Yes it does. These scatter guns go under a few different names F.I.E., Spesco, Kmart.

Attachment 233804
Attachment 233806
Attachment 233807

[Dieselhorses]

Here are some pics of auto ejector, spring, plunger. From the way I think it goes, there must be special tool to depress spring past the 2 stops.






Sent from my iPhone using Tapatalk

[Dieselhorses]

Can someone who owns one of these please send me a pic of spring installed? Sure would appreciate it!


Sent from my iPhone using Tapatalk

[Texas by God]

I can tomorrow if that's ok. It's not at my house.

[Dieselhorses]

I can tomorrow if that's ok. It's not at my house.

Thanks!


Sent from my iPhone using Tapatalk

[Texas by God]

When in doubt- pics. There appears to be a hole for a pin to catch the spring in the 2nd pic. Sort of a weird arrangement but it has never failed. Yes that is a fff recoil pad. Former flip-flop. Your post was timely, lots of rain lately so the old gal was covered in rust. Clean her up and paint the steel parts.
Hope it helps.
TbG

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Dieselhorses]

When in doubt- pics. There appears to be a hole for a pin to catch the spring in the 2nd pic. Sort of a weird arrangement but it has never failed. Yes that is a fff recoil pad. Former flip-flop. Your post was timely, lots of rain lately so the old gal was covered in rust. Clean her up and paint the steel parts.
Hope it helps.
TbG

Sent from my SAMSUNG-SM-G930A using Tapatalk

That’s exactly what I needed! Thanks Texas! Now to get that spring depressed enough. Have to make a tool probably. But again thanks for your time!


Sent from my iPhone using Tapatalk

[Texas by God]

No problem. You owe me a Mudbug dinner

[Dieselhorses]

No problem. You owe me a Mudbug dinner

You got it! I actually got it installed (with some help from my son) and it’s kicking shell out about 8 ft!


Sent from my iPhone using Tapatalk

[Texas by God]

It won't rust now. I walked it the 1/2 mile home tonight and shot one fire ant mound and two cow patties. Dad's tickled about it's new look.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Joebobsdad]

Can you tell me how you managed to get the spring and plunger installed?