Inline FabricationRepackboxRotoMetals2Graf & Sons
WidenersStainLess Steel Media

Results 1 to 12 of 12

Thread: New ASBBDT container and how I PC

  1. #1

    New ASBBDT container and how I PC

    Size comparison to ziplock


    swirl 30 seconds

    separate BB's with popcorn kernels (old maids) separator

    BB's and PC in catch pan, PC'd boolits in DIY bake tray

    BB's and PC dumped back into bowl

    ready to bake

    dumped on towel

    ready to size

  2. #2
    Boolit Master
    CastingFool's Avatar
    Join Date
    Mar 2009
    Climax, Michigan
    Those are nice looking. I hope my first batch will turn that nice.

  3. #3
    Boolit Buddy
    Join Date
    Nov 2011
    SW Florida
    How sturdy are those containers? I just notice that one of my ziplocs has a cracked bottom from the up/down shaking.

  4. #4
    Boolit Buddy Wheelguns 1961's Avatar
    Join Date
    Jun 2018
    Mid atlantic area
    I don’t bother with the bb’s anymore.
    Due to the price of primers, warning shots will no longer be given!

  5. #5
    Boolit Master Walks's Avatar
    Join Date
    Jun 2016
    I started my first PC with one of the tall ones. Couldn't figure out how to get the bullets out, so I dumped it in a flat one. Now that l've seen your sifting arrangement, I'll have to get some more "tools"
    Happiness is a Warm GUN & more ammo to shoot in it.

    My Experience and My Opinion, are just that, Mine.

  6. #6
    Boolit Master

    Rcmaveric's Avatar
    Join Date
    Jul 2017
    Jacksonville, FL
    What are using to seperate the BBs?

    Sent from my SM-G950U using Tapatalk
    "Speak softly and carry a big stick; you will go far."
    ~Theodore Roosevelt~

  7. #7
    They are about the same thickness as the ziplock but cheaper.

    I haven't found the need to shake the bowl, I swirl for 30 seconds then slowly flip the bowl over twice and I'm good.

    "separate BB's with popcorn kernels (old maids) separator bowl"

  8. #8
    Boolit Mold
    Join Date
    Jan 2019
    Lake Oconee Ga
    Do you get thick spots on the sides, from the pc as it melts and cures, as opposed to standing them on bases ?

  9. #9
    I haven't noticed any thick spots when I mic the boolits the measurements are fairly even except at the joint.
    I shake/sift off all the excess PC

  10. #10
    Boolit Mold
    Join Date
    Jan 2019
    Lake Oconee Ga
    They look very good. It looks like your method would be quicker than standing every bullet up.

  11. #11
    The sift and dump method doesn't work with all PC's or colors. Some PC's have better results with this method than others.

    this blue is middle of the road good.

  12. #12
    Boolit Man dpoe001's Avatar
    Join Date
    Nov 2013
    My container has duct tape all around it the cracks started letting powder leak out.will have to look for that brand .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check