WidenersRepackboxInline FabricationGraf & Sons
RotoMetals2StainLess Steel Media

Results 1 to 6 of 6

Thread: Encore Rifle strenth

  1. #1
    Boolit Mold
    Join Date
    Feb 2018
    Location
    U.P of Michigan
    Posts
    26

    Encore Rifle strenth

    I have several encore rifles in calibers to 7mm mag, 35 whelen and 45/70, but have never seen anything printed as to where it stands as compared to 86 Winchester strength, ruger #3 and #1. When a person gets to 45/70 loads or 35 whelen its hard to figure out. All you testers out there should have a lot of info!!











    1

  2. #2
    Moderator Emeritus


    Join Date
    Mar 2005
    Location
    SW Montana
    Posts
    10,133
    My information from Mike Belm is too keep the 300 Win Mag and 7 Rem Mag loaded to under 60K PSI. or frame stretching can occur.
    [The Montana Gianni] Front sight and squeeze

  3. #3
    Boolit Master
    Join Date
    Mar 2005
    Posts
    3,737
    Based on what the factory does you should expect it to stronger than the 1886.
    Who knows how strong the Ruger single shots are since they are chambered for belted magnums?
    The Encore is probably ok with facotory belted magnums since they are sold that way. However they are not very heavy and might give you a beating.

    Pressure data for all SAAMI standardized rounds can be found at the SAAMI web site and in modern loading data. That includes .35 whelen and .45-70.
    EDG

  4. #4
    Boolit Mold
    Join Date
    Feb 2018
    Location
    U.P of Michigan
    Posts
    26
    I think I am going to start with the 45/70 and data in the middle of the 86 Winchester and work up til I encounter some pressure signs. Then I am going to work on the 35 whelen knowing that this info was worked up on bolt actions and I have already used max loads with it, so will start from there and work up slowly looking for pressure sighs also. I cant believe some in one of the reloading books haven't done this as we have so many encores out there and little info on this. Also with all this wealth on these site, I hope someone already had done this!!

  5. #5
    Boolit Master
    Join Date
    Mar 2005
    Posts
    3,737
    Your Encore can be fitted with belted magnum barrels and the factory sells them that way. There should not be ANY .45-70 or .35 Whelen loads published by reputable companies that would damage your Encore.
    EDG

  6. #6
    Boolit Master


    Join Date
    Jul 2008
    Location
    Tennessee
    Posts
    1,700
    If your shoulder can handle the kick so can your Encore as long as safety PSI's are in order.
    Larry

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check