RepackboxRotoMetals2WidenersInline Fabrication
Graf & SonsStainLess Steel Media

Results 1 to 12 of 12

Thread: 9mm AR

  1. #1
    Boolit Master


    tomme boy's Avatar
    Join Date
    May 2011
    Location
    Clinton, Iowa
    Posts
    4,171

    9mm AR

    Anyone build one or buy one. I just ordered a pistol lower that uses Glock mags from PSA. I already have a bunch of Glocks so it seems to work to stay with the same platform.

    Next I have to figure out which upper to get. I think I am going with the FM Products 9.25" side charger upper or PSA 10.5"

    Just wondering how picky they are? If they are like the pistols to get to shoot well?

  2. #2
    Boolit Master BNE's Avatar
    Join Date
    Mar 2013
    Location
    SC
    Posts
    834
    I assembled one for a friend a few weeks ago. I have not shot it, but he loves it. Said it was picky with reloads, but did fine with factory. (I think reloads will work fine, just need to size the cartridge correctly. )

    I have one on order now! I am going with the FM products one that uses Glock mags and holds a spare mag in the handle. The “Glock store” says they have them in stock, but I don’t have a delivery date yet.

    I went with the FM products 8.5” barrel as I hope to get into suppressors when I do t have a college bill for my daughter!

    Can’t wait to compare notes!
    I'm a Happy Clinger.

  3. #3
    I have a psa 10.5" upper and it works great other than that the chamber leade is pretty short it works perfectly with fmj or longer thin round nose (bayou 124gr rn) but truncated cone style bullets have a tendency to stick in the chamber if they aren't loaded pretty short.

  4. #4
    Boolit Buddy
    Join Date
    Mar 2012
    Location
    NE Oklahoma
    Posts
    315
    Iím interested in this...any reason, other than length, to not go with a longer 16Ē barrel?


    Sent from my iPhone using Tapatalk

  5. #5
    Boolit Master

    Ickisrulz's Avatar
    Join Date
    Apr 2010
    Location
    Shawnee, OK
    Posts
    2,276
    Quote Originally Posted by sukivel View Post
    I’m interested in this...any reason, other than length, to not go with a longer 16” barrel?


    Sent from my iPhone using Tapatalk
    Once you get to 9 or 10 inches in a 9mm, you just aren't going to get much more velocity by going to a longer barrel. Of course anything under 16 inches is going to either be a pistol or a SBR. So if you don't want a pistol or SBR you'll have to go 16 inches.

    http://www.ballisticsbytheinch.com/9luger.html

  6. #6
    Boolit Grand Master
    dragon813gt's Avatar
    Join Date
    Feb 2012
    Location
    Somewhere in SE PA
    Posts
    9,261
    I built one w/ Stern Defense parts so the lower wasnít dedicated. I have no issue w/ the mag release location which seems to be an issue for some. I can take the mag block out and run any upper I want on it.

    I donít recommend the KAK Blade pistol brace. It beats you up good if you do shoulder it. There are more comfortable options for the occasional shouldering. And as of typing this shouldering a pistol brace is legal.

    Mine has been reliable w/ any ammo Iíve fed it from WWB 115 grain to 155 grain cast. The throat is generous on the barrel and like all 9mm itís important. Itís one of the most fun guns I own.


  7. #7
    Boolit Master


    tomme boy's Avatar
    Join Date
    May 2011
    Location
    Clinton, Iowa
    Posts
    4,171
    I definitely want to keep it at the 8-10" area. The short throat is what I am worried about. I do have a bunch of lapping bullets but I don't want to use them unless I have to.

  8. #8
    Boolit Master

    merlin101's Avatar
    Join Date
    Mar 2010
    Location
    Rochester NY heading to Gaults Gulch
    Posts
    1,185
    I built a 9mm, I had the standard lower and used the Mean Arms 9mm mag inserts and a cheap no name barrel I picked up at a gun show. When I got the bbl home I noticed that it had no feed ramp, I mean absolutely NONE that I can see, I put it together as is and am happy with it. It seems to handle anything brass case even cast reloads without a problem, the only rounds that do hang up are some cheap steel case stuff I picked up a while back and didn't realize it was steel. That stuff is ROUGH and doesn't work well in any of my 9s, it's only redeeming feature is for malfunction drills. BTW I used the heavy BCG from Brownells and a heavy buffer as was recommended to my and it wooks.
    It's not the years in your life that count. It's the life in your years (Abe Lincoln)

    "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government.Ē George Washington

  9. #9
    Boolit Buddy
    Join Date
    Dec 2016
    Location
    Louisiana
    Posts
    189
    9mm carbines are weird about bullet and powder selection. The fastest load i have used is out of a 13.5" barrel it gets 165fps faster than a 16" with 124gr. over cfe pistol powder. Anything under 10.5 is slow.

  10. #10
    Boolit Master


    tomme boy's Avatar
    Join Date
    May 2011
    Location
    Clinton, Iowa
    Posts
    4,171
    Don't care about speed. Just want reliable and cheep. Consolidating my reloading is the reason for this. And I have always wanted a pistol caliber AR. And now that they are actually cheap enough and they are making them easy to use with Glock mags, why NOT?????

    Plus this may be the last time we are able to own something like this ever again. So I am focusing on things I want right now over this coming year. After this year is up things are going to get mighty scary again and I am NOT going to pay stupid prices for anything. Did not last time and will not next time.

  11. #11
    Boolit Master
    Join Date
    Oct 2013
    Posts
    2,335
    I put one together on an 80% dedicated lower, colt style. Yea the stupid 16in barrel but makes it legal. Not tried a comparison of the various lengths, but 16in they are alot faster than an 8in barrel.

    One issue I had and seems common is some do not cut any sort of throat. Barrel from midway, it would load and fire, but near impossible to unload with the bullet jammed in the rifling. A second barrel from another company was the same. So required buying a throating tool.

    Not seen any issues w reloads vs factory. Fun to shoot.

  12. #12
    Boolit Buddy
    Join Date
    Oct 2008
    Location
    Delmarva
    Posts
    144
    With a Glock style lower most uppers will run fine. BUT any bolt must have the "Glock" style mod. An unmodded Colt bolt won't work.

    A cheap PSA upper will work fine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check