RotoMetals2RepackboxADvertise hereMidSouth Shooters Supply
Inline FabricationWidenersTitan ReloadingLee Precision

Results 1 to 10 of 10

Thread: 30-06 and 200+ grain bullets

  1. #1
    Banned
    Join Date
    Dec 2018
    Posts
    337

    30-06 and 200+ grain bullets

    Lyman doesn't go past 210. So im wondering on the loads your guys are using for the 220 to 240 grain bullets.

  2. #2
    Banned

    Blammer's Avatar
    Join Date
    Feb 2007
    Location
    Asheville, NC
    Posts
    10,431
    I started with IMR3031 and worked up till I got accuracy or pressure signs.

    I got accuracy first.

  3. #3
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    8,632
    Use 30-40 Krag data for the 220gr.

  4. #4
    Boolit Master Dan Cash's Avatar
    Join Date
    Jun 2008
    Location
    Western North Dakota
    Posts
    3,045
    215 grain Accurate bullet paper patched over 52 grains Reloader 19 or IMR 4350 gives a factory level velocity and 3" at 200 yards. 42 grains of same with same bullet is my .30-40 load.
    To paraphrase Ronald Reagan, the trouble with many shooting experts is not that they're ignorant; its just that they know so much that isn't so.

  5. #5
    Boolit Master



    Join Date
    Feb 2018
    Posts
    1,079
    I have the Lee mold for 300 Blackout. 230 grains with a boat tail. Iíve loaded it sub sonic in 308 and am thinking of trying it in .30-06 soon with full loads. If I do, Iíll let you know what I used.

  6. #6
    Boolit Master

    Moonie's Avatar
    Join Date
    Apr 2010
    Location
    Thomasville North Carolina
    Posts
    4,658
    35gr of H4895 gave me 1,950fps with a 245gr boolit in my 30-06.

  7. #7
    Boolit Master

    Join Date
    Mar 2005
    Posts
    1,390
    Quote Originally Posted by Moonie View Post
    35gr of H4895 gave me 1,950fps with a 245gr boolit in my 30-06.
    Moonie,
    What mold and what was your accuracy @ 100 yds?
    I am looking for a 200gr. + mold for my .308 & 30-06 is why I ask..
    Any heavy .30 cal. bullet over 1800 fps. has to be a real killer..
    Thanks





  8. #8
    Boolit Master

    Moonie's Avatar
    Join Date
    Apr 2010
    Location
    Thomasville North Carolina
    Posts
    4,658
    The Accurate Molds 245GB, accuracy was about 2MOA give or take in that bolt action rifle.

  9. #9
    Boolit Grand Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    7,352
    Safe rule is to use 75% of the jacketed charge for a bullet of the same weight, when using an extruded tubular powder similar to Varget, 4895, RL15, IMR4064.

    Spheroidal powders such as H335, WC844/846, H414, W748, W760, H380, H450 etc. can't be reduced below 85% of free airspace or they get "hinky," so don't try it with those.

    Slower extruded tubular powders such as 4350 and 4831 don't like it either!

    With the "Garand" .30-'06 powders listed above you can reduce to 60% IF you use a loose Dacron fill tucked into the case mouth to take up some of the excess free airspace. NOT pushed down upon the powder!!!!

    Larry Gibson has posted lots of good info on this.

    I use 30 grains of the above powders with #311299 in the .30-'06 with Dacron fill for very good results.

    In .303 British or .308 Win. the same 30 grains of the above powders will work fine without a filler.
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  10. #10
    Banned

    Blammer's Avatar
    Join Date
    Feb 2007
    Location
    Asheville, NC
    Posts
    10,431


    IMR3031 powder equivalent

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check