Is there anybody making (customizing) lee size dies (besides Lee)???
I need a .432
Can/will anybody here take my .430 die and ream it to .432 (for example) for less than $38 + S&H Lee wants for a custom kit?
Dick
Is there anybody making (customizing) lee size dies (besides Lee)???
I need a .432
Can/will anybody here take my .430 die and ream it to .432 (for example) for less than $38 + S&H Lee wants for a custom kit?
Dick
A dowel and fine grit wet or dry paper will do it. Go slow and check often. A few threads on the process.
swamp
There is no problem so great, that it cannot be solved by the proper application of high explosives.
This should help:
http://castboolits.gunloads.com/show...lee+sizing+die
You cannot discover new oceans unless you have the courage to lose sight of the shore
I am not sure. A search for enlarging a size die might do it. The basic idea is use a dowel with the sandpaper wrapped around it and roll the die on a flat surface. Run a boolit thru it to check the size. Check it often. It will not take much to remove .002.
Someone will chime in with where to get more detailed instructions.
swamp
There is no problem so great, that it cannot be solved by the proper application of high explosives.
Here you go , just make sure to use longer strokes
when your rolling the die .
https://www.youtube.com/watch?v=ZDAwaaPNxU0
Last edited by D-RIG; 01-09-2019 at 12:06 PM.
NOE has that .432 size die. But you need buy NOE sizing die system
http://noebulletmolds.com/NV/index.p...neimv9rfbb2lq1
http://noebulletmolds.com/NV/product...neimv9rfbb2lq1
That NOE's sizing die system fits Lees presses...
Last edited by Teemu; 01-09-2019 at 12:48 PM.
+1 on the NOE system. Got mine shortly after I began powder coating and it's proved to be the best equipment investment I've made in a long, long time. Works great for sizing pan-lubed boolits for my BPCRs, too.
Bill
"I'm not often right but I've never been wrong."
Jimmy Buffett
"Scarlet Begonias"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |