WidenersRotoMetals2RepackboxInline Fabrication
MidSouth Shooters SupplyTitan ReloadingLee Precision

Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: Difficult sizing after PC

  1. #21
    Boolit Master


    cwlongshot's Avatar
    Join Date
    Jul 2012
    Location
    Central Connecticut
    Posts
    890
    I agree keep the die cleaned, scrub the bore wit appropriate bore brushes and solvent.

    I also agree, LUBE with bullet lube. I do not like One Shot for case lube, but I have a few cans, so I have been using it as BULLET size lube and it seems to work well enough there.

    I do feel a difference in harder bullets and also when I size a bullet that didn't get good lube. But properly lubed bullets run thru smoothly.

    I have cleaned hem off and NOT cleaned them off afterwards... don't find much difference.

    I agree WD-40 isn't for bullets or really anything re loading...

    CW
    NRA Life member • NRA Certified Pistol & Shotgun Instructor • NRA Certified Rifle Coach • Certified Range Officer • Reloading Instructor
    REMEMBER, FREEDOM IS NOT FREE

  2. #22
    Boolit Buddy Sig556r's Avatar
    Join Date
    Feb 2014
    Location
    West of H-Town
    Posts
    292
    I use Lee water-based sizing paste every 5 or so bullet, never had problem...
    I use Hornady dry lube on the die after cleaning every 5k.
    Sig

  3. #23
    Boolit Master
    Dragonheart's Avatar
    Join Date
    Jan 2012
    Location
    Katy, Texas
    Posts
    1,968
    If you want an easier sizing just mist your bullets with a 12-1 mix of 99% alcohol to lanolin. The alcohol will evaporate almost immediately leaving a thin wax coating on the bullets so they require much less effort to size.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check