RotoMetals2Inline FabricationStainLess Steel MediaWideners
RepackboxGraf & Sons

Results 1 to 11 of 11

Thread: Looking for a heavier 7x57 bullet

  1. #1
    Boolit Bub
    Join Date
    Jan 2013
    Posts
    70

    Looking for a heavier 7x57 bullet

    Hi All,

    I have a Brazilian 1908 7mm that I'm having a tough time getting accurate loads with. The rifle has a very long throat, and a somewhat rough bore. I'd like to try it out with a long, flat-base bullet.

    Does anyone know of a 175-ish grain bullet mold in 7mm that seems to work for you, and where I could find one to buy?

    Thanks,

    8mmFan

  2. #2
    Boolit Master
    Join Date
    Dec 2009
    Location
    Los Angeles
    Posts
    783
    Noe has some heavy boolit molds. I have a Rcbs 145 grain silhouete mold that works very well in mine. I use it with 25 grains of 4895 and it will do an inch or so at 100 yrds. I am afraid though that a rough bore is your problem. have you slugged the bore to see what dia. boolit you need. I found that seating mine out a bit farther than normal helped accuracy. I just checked the NOE website and they have a 178 and a 181 grain boolit mold. The diameter is the crucial thing.
    Last edited by koehn,jim; 01-05-2019 at 09:03 AM.
    jim

  3. #3
    Boolit Bub
    Join Date
    Jan 2013
    Posts
    70
    Thanks Jim,

    I have not slugged the bore. I will do so and report back. I'll also check out the NOE website--I've never even looked at their molds. I've only ever used LEE molds, and LEE only has a couple of 130's.

    8mmFan

  4. #4
    Boolit Buddy hockeynick39's Avatar
    Join Date
    Jun 2014
    Location
    South of San Antonio, TX
    Posts
    126

  5. #5
    Boolit Buddy
    Join Date
    Jan 2011
    Location
    Northeast
    Posts
    246
    Measure the inside neck of your fired cases. That will tell you how big the neck opens. You want a lead boolit about that size. My Brazilian 1908 7mm uses a boolit sized to .288 to fill the throat.

  6. #6
    Boolit Buddy
    Join Date
    Aug 2014
    Location
    Mansfield, PA
    Posts
    263
    8MMFan,

    My M1893, M1895 and M1916 7MM Mausers all like the Lyman #287308, a 168 grain RN cast boolit. I hope this helps.

    Adam

  7. #7
    Boolit Master


    richhodg66's Avatar
    Join Date
    Nov 2009
    Location
    Kansas
    Posts
    4,466
    Quote Originally Posted by Adam Helmer View Post
    8MMFan,

    My M1893, M1895 and M1916 7MM Mausers all like the Lyman #287308, a 168 grain RN cast boolit. I hope this helps.

    Adam
    Mine likes this one too, hard to find mold though. Mine is hollow pointed and worked well on a white tail doe this October.

    That NOE bullet looks great. RCBS also has a 168 grain bullet in their line up.

  8. #8
    Boolit Bub
    Join Date
    Jan 2013
    Posts
    70
    Thanks, guys. I really appreciate the feedback. I have never slugged a bore, before. But I will with this one as I really, really like the lines and feel of it and I'd like to get it to at least a level of accuracy acceptable for deer hunting and such.

    I will work with it using your suggestions and report back. Won't be today as it's my sons' 8-year birthday and I'll be busy (partially with taking him to the rifle range for a bit!). But when I do get to the rifle, I'll not forget to report back.

    By the way, Jim, it was a real eye opener to check out those NOE molds with the differing diameters. Thanks for the suggestion! Have a great day (at the range, hopefully) guys!

    8mmFan

  9. #9
    Boolit Master
    Join Date
    Apr 2013
    Location
    Northern California
    Posts
    669
    I have an old VZ-24 Mauser in 7X57 that was built for export to South America.

    I slugged the bore and found that it measured .288". I ordered this mold from NOE:

    http://noebulletmolds.com/NV/product...qlc923hh9iq7e4

    I gas check it and size it to .290".

    It is probably one of my most accurate rifles.

    Bullet fit is everything.

    Best of luck.


    Steve in N CA

  10. #10
    Boolit Buddy
    Join Date
    Mar 2014
    Posts
    205
    i use the rcbs 168 grain silhouette mold and imr 4227 (22 grains, i think).

  11. #11
    Boolit Master
    Join Date
    Oct 2013
    Posts
    2,338
    Both my old Spanish 7mm shoot the 175gr NOE fine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check