NOE 22 cal Hunter Mold are shipping!!!!!

[nvreloader]

Guys
I just received my 22 Hunter mold at 4:00 pm, so if you ordered one, be looking for it,
the pony express is delivering them.

I got the 4 gang Alum mold and a sack full of different pins, for the various pellet weights.

I just found out, I shouldn't use it, as the mold hole closest to the sprue plate pivot pin,
as a burr on the bottom of the sprue hole,
that is scratching the mold surface and into the top of the cavity head.

So, I'll probably have to send it back for warranty work...........

Tia,
Don

[kbstenberg]

Why don't you just. Take the plate off and hone the bottom of it?

[GARD72977]

That would be dissapointing. Noe is great im sure he will take care of it.

[nvreloader]

I would, but I don't want to void the warranty etc,
as I can't get thru to NOE via email or phone etc.

I also see (under magnification) a second sprue hole has the same problem,
kinda rough milling on the plate bottom........around the sprue holes,
kinda looks like they were punch out, instead of be cut.

Tia,
Don

[nvreloader]

Just an FYI,
NOE site is back up and running,
Just checked..........

Tia,
Don

[35 shooter]

Glad you got the mold, but hate you have a problem with it. I thought stuff like that only happened to me.
Hope you get it resolved soon!!

[nvreloader]

Just got the phone with Al,
he is sending a new part to get me started.

NOE stands behind their products.

Tia,
Don

[35 shooter]

Good to hear! Al really takes care of his customers.

[otarov]

Hello. Please tell me the address where you can order bullet casting forms for pneumatics .22 and .177 caliber

[clodhopper]

Otarov, the address you want.
https://www.noebulletmolds.com/NV/ad...d25sv4&x=0&y=0

[otarov]

Thanks for the link. I will look