BT Sniper
Here is a 45 cal SWC that will be perfect for making your 45 cal cast boolits even more accurate and perfectly symmetric as well as eliminating any voids in the cast lead, this should give the best possible oportunity for utmost accuracy potential from cast boolits. Use with a Corbin base guard, or naked lead boolit for TL, an already lubed boolit, a PC coated boolit or even make half jacketed bullets.
Bullets from die measure .4535" and diameter of meplat is .312, should be just about perfect for any 45 cal cast boolit needs.
Comes with FP punch, additional HP punch available for $75 extra.
Die is same material and quality as my BTSniper premium bullet swage dies, quality professionally heat treated steel with polished steel finish.
I'm letting this excellent die go for $299 plus $20 S&H
Can be used in any decent reloading press and a simple mallet is all that is needed to eject the bullet from the die (auto ejection system is also available). I don't know the max BNH it will handle but off the top of my head, I would put it at 15BNH max and preferably around 10 BNH or less for max life.
Die is same as one pictured below just doesn't have the Black Nitride finish. Makes exact same bullets as shown below.
240 grain 44 cal swaged up to 45 cal SWC. Use Corbin 45 cal base guards for perfect results!
or even 45 cal jackets can be used (may require a core seat die for best results). Lead boolit was a 45 cal 245 grain swaged to SWC.
I am happy to accept paypal (friends and family), money order, check or credit card over the phone.
Thanks for looking.
Brian Thurner
PO BOX 1783
Hood River, Or.
979031
PayPal address is BT_Sniper@Hotmail.com
BTSNIPER llc.
541-436-4095
|
   
   
|
|
