Lee PrecisionRepackboxWidenersLoad Data
Titan ReloadingReloading EverythingInline FabricationMidSouth Shooters Supply
RotoMetals2
Results 1 to 8 of 8

Thread: WTS 45 caliber custom Flintlock.rifle

  1. #1
    Boolit Master HARRYMPOPE's Avatar
    Join Date
    Jan 2011
    Location
    GRANT COUNTY Wa.
    Posts
    2,134

    WTS 45 caliber custom Flintlock.rifle

    Beautiful piece of maple I think a Siler lock and a deep rifled barrel. Don't know much more but it appears to be well put together I only fired it a few shots and it decided to stay with my 50 calibers and cap locks. I tried to remove the vent liner and could not it is either soldered in there or seized up.
    Also the way the trigger assembly was set up you have to pull the set before you can put it to half cock. This price is less than the parts it would take to build the gun. Guns in very nice shape and Bore is good

    $450 and buyer pays shipping.

    Attachment 231536

    Attachment 231537

    Attachment 231538

    Attachment 231539
    Last edited by HARRYMPOPE; 12-06-2018 at 01:25 PM.
    Your mother was a hamster, and your father smelt of elderberries

  2. #2
    Boolit Grand Master


    missionary5155's Avatar
    Join Date
    Feb 2007
    Location
    Last trip to Arequipa... till April.
    Posts
    7,133
    Good afternoon
    The barrel length and is there any information on the barrel who made it.
    "Come unto Me, all you who labor and are heavy burdened, and I will give you rest." Matthew 11:28
    Male Guanaco out in dry lakebed at 10,800 feet south of Arequipa.

  3. #3
    Boolit Master HARRYMPOPE's Avatar
    Join Date
    Jan 2011
    Location
    GRANT COUNTY Wa.
    Posts
    2,134
    Barrel is I believe 40 in. No makers name. I believe it is from a TVM kit. It is put together very well doesn't look much like a amateur job.
    Your mother was a hamster, and your father smelt of elderberries

  4. #4
    Boolit Master
    Join Date
    Jul 2009
    Location
    Tennessee
    Posts
    2,794
    Straight barrel or tapered and flared? Does the vent liner need replacing?
    “You don’t practice until you get it right. You practice until you can’t get it wrong.” Jason Elam, All-Pro kicker, Denver Broncos

  5. #5
    Boolit Master HARRYMPOPE's Avatar
    Join Date
    Jan 2011
    Location
    GRANT COUNTY Wa.
    Posts
    2,134
    Quote Originally Posted by rking22 View Post
    Straight barrel or tapered and flared? Does the vent liner need replacing?
    Non swamped barrel.vent liner is stainless and is in good condition.straight 13/16 barrel "i think" and not a very heavy gun
    Your mother was a hamster, and your father smelt of elderberries

  6. #6
    Boolit Man
    wyoduster's Avatar
    Join Date
    Dec 2011
    Location
    Austin, Pa
    Posts
    81
    PM sent
    I'll take it with consideration of PM...

  7. #7
    Boolit Master HARRYMPOPE's Avatar
    Join Date
    Jan 2011
    Location
    GRANT COUNTY Wa.
    Posts
    2,134
    StillAvailable

    I should mention that I'm firm on this price and the buyer is going to pay shipping.
    Shipping from the west coast to the east coast is going to run about $70
    Your mother was a hamster, and your father smelt of elderberries

  8. #8
    Boolit Master HARRYMPOPE's Avatar
    Join Date
    Jan 2011
    Location
    GRANT COUNTY Wa.
    Posts
    2,134
    Sold to wyoDuster
    Your mother was a hamster, and your father smelt of elderberries

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check