RotoMetals2MidSouth Shooters SupplyWidenersGraf & Sons
StainLess Steel MediaInline FabricationRepackbox

Results 1 to 12 of 12

Thread: Cut away Seating Die

  1. #1
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    423

    Cut away Seating Die

    I just watched a video with someone loading .45-70 rounds. When it came time to seat thr boolits in the cases, he had a seating die that was cut away, so you could watch the boolit being seated in the case. This way you knew exactly how far it was being seated without having to continuously pull the boolit back down to check.

    I found this very interesting and was wondering if a die like this is sold or was homemade?

    Thanks

  2. #2
    Boolit Master

    Calamity Jake's Avatar
    Join Date
    Mar 2005
    Location
    Okla. City
    Posts
    2,389
    Vickerman inline seater https://www.vickermandie.com/products/
    Calamity Jake

    NRA Life Member
    SASS 15704
    Shoot straight, keepem in the ten ring.

  3. #3
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    423
    Wow that’s an awesome setup. I think I might get that on the wish list. Thanks for the info.

  4. #4
    Boolit Master

    Omega's Avatar
    Join Date
    Jul 2014
    Location
    Clarksville, TN
    Posts
    920
    RCBS makes a micrometer seating die with the cutout as well, though not sure if it's available for all calibers.
    https://www.midwayusa.com/product/10...ies-seater-die
    "Freedom is the sure possession of those alone who have the courage to defend it."
    ~Pericles~

  5. #5
    Boolit Master
    Join Date
    Nov 2006
    Posts
    3,404
    The main benefit of the Vickerman die is the precision seating with little or no runout.

  6. #6
    Boolit Master TNsailorman's Avatar
    Join Date
    Dec 2006
    Location
    Northeast Tennessee Hills
    Posts
    1,055
    Herter's also sold these dies at one time. I had a set but sold them as I could find no real benefit and the added tolerances on the Herter's did not sit well with me. I would say the Vickermann's and the RCBS would have much tighter tolerances than the Herter's. Just my opinion though, james

  7. #7
    Moderator



    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    10,955
    I see Herters cut-away seater dies at gunshows all the time, they usually don't bring any more money that standard herters seater dies.

  8. #8
    Boolit Master Pavogrande's Avatar
    Join Date
    Oct 2007
    Location
    Dacula Ga formerly san josie calif
    Posts
    592
    I think that style of herters die was called "model perfect" -- I have a couple sets 243 and 308 I think. I have never used them --
    I think the die body is made from tubing rather than bar stock --
    The matching sizer uses a similar body with a changeable insert - caliber to caliber ----

  9. #9
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    9,275
    The sliding sleeve seaters with the cut out supposedly alighn the case and bullet much better. The case is ran into the die and the bullet inserted thru the opening into the sleeve ( bored very close to the bullet dia) while the lower part of the sleeve supports the case neck and shoulder. RCBS makes then currently herters, Belding and Mull, Vickerman, and I believe Neil Jones have made them also.

  10. #10
    Boolit Grand Master Char-Gar's Avatar
    Join Date
    Mar 2005
    Location
    Deep South Texas
    Posts
    11,909
    Quote Originally Posted by MT Chambers View Post
    The main benefit of the Vickerman die is the precision seating with little or no runout.
    That is correct. The Vickerman die is designed for "straight line" bullet seating. The opening in the die is insert the bullet where it is in line with the case.

    The Wilson hand seating die is another popular die for "straight line" seating. At one time Lyman made a line of PA (precision alightment) to do much the same thing. These Lyman PA dies have larger tolerances and many can be used to seat the fatter cast bullets. Vickerman and Wilson dies are a very close fit for jacketed bullets. Fatter case bullets won't work in these dies unless you have one made. I have some Wilson dies (308 ad 30-06) make to take up to .3125 bullets. I also have a .3125 custom bullet sleeve for my 30 cal Vickerman.
    Disclaimer: The above is not holy writ. It is just my opinion based on my experience and knowledge. Your mileage may vary.

  11. #11
    Boolit Master
    Join Date
    May 2010
    Location
    central texas
    Posts
    577
    I like the vickerman but my Redding inline seater gives me less run out than anything I have used for seating 45-70 cast bullets.

  12. #12
    Boolit Master
    midnight's Avatar
    Join Date
    Sep 2009
    Location
    East Troy, WI
    Posts
    971
    I have and use the old original Vickerman seaters from .224 through .358. I even have and use one for .510 50 BMG bullets. They are very precise. I am unable to seat .512 cast bullets in the 50BMG because they are too large in diameter. Only .510 jacketed bullets fit in the die.

    Bob
    Si hostes visibilis, etiam tu

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check