Inline FabricationMidSouth Shooters SupplyRepackboxSnyders Jerky
Lee PrecisionReloading EverythingTitan ReloadingWideners
Load Data RotoMetals2
Results 1 to 8 of 8

Thread: WTB- 3118/311008 or similar mold for a 32-20

  1. 11-26-2018, 03:30 AM #1
    35 Whelen
    35 Whelen is offline
    Boolit Master 35 Whelen's Avatar
    Join Date
    Feb 2006
    Location
    North Central Texas
    Posts
    1,556

    WTB- 3118/311008 or similar mold for a 32-20

    I'm looking for a mold for a 32-20 Winchester. Something in the 115 gr. range and I'm open to GC or PB.

    Thanks!

    35W
    The biggest waste of time is arguing with the fool and fanatic who doesn't care about truth or reality, but only the victory of his beliefs and illusions.
    There are people who, for all the evidence presented to them, do not have the ability to understand.

    NRA Life Member
  2. 11-26-2018, 09:11 AM #2
    kbstenberg
    kbstenberg is offline
    Boolit Master
    Join Date
    Apr 2009
    Location
    northern Minn. in the boonies
    Posts
    2,178
    I have 2 molds you mite be interested in Ideal 3118 DC PB, and a Lee DC GC. After the wife gets up i can go downstairs and get the dimensions for you.
  3. 11-26-2018, 09:14 AM #3
    35 Whelen
    35 Whelen is offline
    Boolit Master 35 Whelen's Avatar
    Join Date
    Feb 2006
    Location
    North Central Texas
    Posts
    1,556
    Quote Originally Posted by kbstenberg View Post
    I have 2 molds you mite be interested in Ideal 3118 DC PB, and a Lee DC GC. After the wife gets up i can go downstairs and get the dimensions for you.
    Sounds good.
    The biggest waste of time is arguing with the fool and fanatic who doesn't care about truth or reality, but only the victory of his beliefs and illusions.
    There are people who, for all the evidence presented to them, do not have the ability to understand.

    NRA Life Member
  4. 11-26-2018, 06:34 PM #4
    kbstenberg
    kbstenberg is offline
    Boolit Master
    Join Date
    Apr 2009
    Location
    northern Minn. in the boonies
    Posts
    2,178
    3118 flat point L .637 base b. .3125/.313 second b. .311/.312 top b. .311/.313 above top b..303 cast of COWW
    Lee RN GC L .673 check .282 base b. .312/.3115 second b. .3115/.312 top b. .312/313 cast of 50%CO/50%soft One of the lee cavities drops with a nipple on the exact center of the bullet. It swages out when sized with a round or flat top punch.
    Those are as cast sizes.
    I could sell or trade for another mold 30XCB 311299 311284 Kevin i can be contacted here or on Ben's web site with PM
  5. 11-26-2018, 06:39 PM #5
    maxiblu
    maxiblu is offline
    Boolit Mold
    Join Date
    Apr 2015
    Location
    Hobart, IN
    Posts
    17
    I would be interested in the 3118. I assume it is a single cavity. What would be your price?

    Thanks
  6. 11-26-2018, 08:01 PM #6
    35 Whelen
    35 Whelen is offline
    Boolit Master 35 Whelen's Avatar
    Join Date
    Feb 2006
    Location
    North Central Texas
    Posts
    1,556
    PM sent on the 3118.
    35W
    The biggest waste of time is arguing with the fool and fanatic who doesn't care about truth or reality, but only the victory of his beliefs and illusions.
    There are people who, for all the evidence presented to them, do not have the ability to understand.

    NRA Life Member
  7. 11-26-2018, 08:34 PM #7
    dbosman
    dbosman is offline
    Boolit Master dbosman's Avatar
    Join Date
    Feb 2013
    Location
    East Lansing, MI, USA
    Posts
    1,995
    After the above are taken, https://www.midwayusa.com/product/23...rain-flat-nose
    Lyman 2-Cavity Bullet Mold #311008 32-20 WCF (312 Diameter) 115 Grain Flat Nose $76.99
  8. 11-26-2018, 09:54 PM #8
    oscarflytyer
    oscarflytyer is offline
    Boolit Master oscarflytyer's Avatar
    Join Date
    May 2009
    Posts
    778
    If 35/KB don't work out a deal on the 3118, I would be interested.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check