Titan ReloadingMidSouth Shooters SupplyWidenersGraf & Sons
RepackboxRotoMetals2Lee PrecisionInline Fabrication

Results 1 to 4 of 4

Thread: NOE 180g loading deep in 35rem

  1. #1
    Boolit Buddy
    Join Date
    Mar 2013
    StL MO

    NOE 180g loading deep in 35rem

    I put a bullet into a fired case and chambered to get an idea on OAL for my Contender. it buried deep enough to put the check into the case. You can see in the pic where the ogive goes right into bullet diameter. Itís sized 359.

    Not real worried from a safety standpoint but any thoughts on getting the best accuracy?

    Click image for larger version. 

Name:	B5C66364-9492-4E4A-9DBA-4EEBF55C8370.jpg 
Views:	18 
Size:	30.5 KB 
ID:	231005
    My other forum, where I'm building a cabin....http://www.small-cabin.com/forum/6_3325_0.html#msg48687

  2. #2
    Boolit Buddy
    Mr Peabody's Avatar
    Join Date
    Dec 2005
    I'll bet it shoots just fine. I shoot a 250gr Saeco design in my 35 Whelen that has about that much of the check in the case, and it's a good shooter.

  3. #3
    Boolit Master gpidaho's Avatar
    Join Date
    May 2014
    Beautiful Idaho
    Mattd: They seat like that in my 35Rem Handi rifle too. They shoot just fine. Gp

  4. #4
    Boolit Buddy
    Join Date
    Aug 2007
    Matt -

    Howdy !

    I DK what the intended use is for your 180GC load(s) ?

    From a pure accuracy standpoint, I got great results using IMR4759 under swaged & patched 150 gr .35 cal bullets that went a similar depth into the case. I know IMR4759 is on its way " out ", but might be worth a look?
    My rifle is a M-336 XLR .35Rem w/ BALLARD-style rifling.

    In the same rifle, I got great accuracy w/ Cutting Edge 150gr Extended Range Raptor ( turned brass ) over a reduced charge of H4198.
    These have a noteable boat tail, and extended even deeper into the .35Rem case.

    Again, I don't know whether reduced loads are a good fit for you shooting needs, but some fine accuracy can often be found by going that route.

    With regards,
    Kevin 357Mag

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check