WidenersRotoMetals2Inline FabricationStainLess Steel Media
RepackboxGraf & Sons

Results 1 to 8 of 8

Thread: Marbles Peep Sight for Savage 1899

  1. #1
    Boolit Mold Hinnerk's Avatar
    Join Date
    Jul 2016
    Posts
    27

    Marbles Peep Sight for Savage 1899

    Are they supposed to come like this? Obviously this will dig into the stock if I can even manage to get the screws to start. Did the profile change over the years? If these are meant to be bent to fit, what is the normal procedure?

    My rifle is a model 1899 made in 1915, I believe.

    Click image for larger version. 

Name:	KIMG2967.jpg 
Views:	18 
Size:	47.7 KB 
ID:	230912

  2. #2
    Boolit Buddy Sam Casey's Avatar
    Join Date
    Sep 2015
    Location
    Great Lakes
    Posts
    182
    Old sights best for old guns

  3. #3
    Boolit Master Walks's Avatar
    Join Date
    Jun 2016
    Location
    SoCal
    Posts
    785
    If that is the correct sight it should follow the profile of the tang. Unless someone changed the profile before you got it.
    Happiness is a Warm GUN & more ammo to shoot in it.

  4. #4
    Boolit Mold Hinnerk's Avatar
    Join Date
    Jul 2016
    Posts
    27
    I don't see any evidence that the profile of my rifle was modified at some point and this IS the sight that Marbles sells for the Savage 99. I guess I am going to have to contact them and see what they advise.

    Sent from my E6810 using Tapatalk

  5. #5
    Boolit Buddy
    Join Date
    Jan 2011
    Location
    Prineville, Oregon
    Posts
    340
    I have put new Marble's on new Savages and on old Savages and they fit fine -- same tang contour from 1895 to the 1970's as far as I know. That one in your picture looks to me to have too much bend -- I am thinking you have a defective Marble's sight there. Give Marble's a holler -- they owe you a replacement.

  6. #6
    Boolit Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    3,327
    .

    I would just give the forward/bent section of the base a few (padded) love taps to make it conform to the rifle mounting area.

    .
    Experience is a wonderful thing - It lets you recognize a mistake, when you make it again.

  7. #7
    Boolit Master
    Join Date
    May 2013
    Location
    Eastern WY
    Posts
    664
    I have 3 of then, all needed some CAREFUL bending, straightening to properly fit the tangs of multiple Savage 99's and 1899's. I used a hardwood dowel and a hardwood block to avoid damaging the sight. I too thought something was out of order when I tried the first one, then I checked the other 2, all new, and found that was just how they were.

  8. #8
    Boolit Master
    Join Date
    Apr 2007
    Location
    Annapolis,Md
    Posts
    2,251
    Get your money back and then spend whatever it takes to put yourself into a vintage Lyman or Marble's tang sight. you'll thank me.

    I have a vintage Marble's tang sight for the 99 I'll let go for $100 if anybody wants it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check