310 tool die charts?

[LRRifleman]

I have a wall chart and a web chart for 310 dies; however, they seem to be incomplete. I know that Lyman has offered dies in at least 223 Remington and 7mm Rem Mag which are not included on these charts. Does anyone have a complete chart of 310 dies that they can point me to or can share?

Thanks in advance for your help!

[dsh1106]

I use these places

http://www.endtimesreport.com/Lyman_310_Tong_Tools.html

http://castpics.net/dpl/index.php/th...die-code-chart

I'm sure I have a few more some where, but these are my go to's

Scott

[Green Frog]

The second listing that Scott gives is as complete as any I know of... I say this because I have been assembling it since sometime back in the mid-90s. Some numbers have just managed to elude me, though. As for your questions about numbers such as the 223/5.56 mm, and the 7 mm anything... keep in mind that these dies neck size only, so if you have a die for a similar caliber, it may well work. You can count, for instance, on the very common 222 dies working for the 223 if you crank them back to the right length; and for 7 mm Rem Mag, look for another cartridge in 7 mm, and if the case body isn't too small, the dies for it should work for the Rem Mag.

Regards,
Froggie

[gmsharps]

Thanks for the great info

gmsharps