Graf & SonsRotoMetals2StainLess Steel MediaWideners
MidSouth Shooters SupplyInline FabricationRepackbox

Results 1 to 13 of 13

Thread: Storing Dies and Punches to Prevent Dreaded Metal Cancer/Corrosion

  1. #1

    Storing Dies and Punches to Prevent Dreaded Metal Cancer/Corrosion

    What is the best way to store your Swaging dies, punches and other small tools so rust/corrosion is less a chance to form ?
    I understand that heat treat steel is resistant,carbide even more so, but it would eventually be effected too -right ?
    I don't want this on my tools but how can it be prevented , and aren't they pretty much useless if its in the critical area that has surface contact (that actually forms the copper or lead )or rides on another part of the steel surface ?
    I store mine in Flambeau storage cases and even included some of the new blue Zerust dividers that are supposed to keep corrosion from forming in the sealed container .
    I even wear gloves first to prevent fingerprints and spray,then wipe them down with a product called Fluid Film -which is lanolin based aerosol -which claims to be a "superior lubricant" and contains no silicone or Teflon ...plus already using pure lanolin and castor oil for Swage lubes , so I thought this must be a good idea as I want this gear to last a lifetime for as hard to come by as it has been to get .
    I also unfortunately don't have my equipment stored in a 100% Room Temperature environment as my garage /workshop is heated but fluctuates somewhat in the winter depending if I am actually in there or not doing something ..High heat bills !
    I used to live in S.Florida and it seemed impossible to keep my hand tools from rusting in the garage ,but I never need heat either . The humidity was a super problem ,But Kentucky has it's fair share of humidity too .
    What seems to work the best to prevent these tools from be lost to rust / yes I am paranoid but I want these to last my lifetime anyway ?

  2. #2
    Boolit Master
    Join Date
    Apr 2016
    Location
    NC
    Posts
    756
    Condensation will cause rust fast. Water condenses when the room warms up and the steel stays cold. To avoid this you can take a large cheap cooler. Mount an incandescent light bulb or very small heater inside, and store your tools in there. They will always be a little warmer than room temp, so no condensation. Adding dessiscant to the cooler can’t hurt.

  3. #3
    Cosmoline


    Sent from my iPhone using Tapatalk
    Using Tapatalk

  4. #4
    Banned
    Join Date
    Oct 2018
    Posts
    28
    Just keep them oiled.

  5. #5
    Boolit Buddy
    Join Date
    Dec 2017
    Location
    Farmerville,Louisiana
    Posts
    334
    LPS #3 in spray can is what I use to prevent rust on any metal tool, it looks bad, an old Warrant officer showed us this back in 1971 how he kept his dies from rust. And this is Louisiana, very humid and wet. You just have to clean up before use but they wont rust.

  6. #6
    Boolit Buddy

    Join Date
    Apr 2009
    Location
    Cleveland, OH
    Posts
    376
    I find that one of the easiest things to do is just keep some castor oil on them and store them in a padded foam envelope and then place that in a ziplock bag. I have been doing this for years and my dies are as bright as the day they were made. I also store those bags in one of those tight sealing cases made by rigid. It has a gasket to keep the moisture out. You want to keep your dies sealed up and away from moist air as much as possible.
    Zbench

  7. #7
    Boolit Bub


    Casper_SWAT's Avatar
    Join Date
    Feb 2010
    Location
    Arkansas, USA
    Posts
    48
    Coffee can in motor oil.

  8. #8
    Vendor Sponsor


    BT Sniper's Avatar
    Join Date
    Jan 2009
    Location
    Oregon next to the river
    Posts
    5,208
    Guess I might as well say it..... Black Nitride Processing

    Sorry, shameless plug

    Swage on!

    BT
    When you stop learning you are dying.

    Check out available BTSniper products and prices at
    http://castboolits.gunloads.com/foru...?114-BT-Sniper

    Say hello and like my FB page as well.
    https://www.facebook.com/bt.sniper/

    Good shooting and swage on!

    Brian

  9. #9
    Banned
    Join Date
    Oct 2018
    Posts
    28
    hahaha. Do you offer Nitride treatment for stuff we have?

  10. #10
    Boolit Master
    woodbutcher's Avatar
    Join Date
    Feb 2008
    Location
    LaFollette Tn
    Posts
    1,095
    Hi GunsnGlory.There`s a line from an old song that should answer that question"If you got the money honey.WE got the time".
    Good luck.Have fun.Be safe.
    Leo
    People never lie so much as after a hunt,during a war,or before an election.
    Otto von Bismarck

  11. #11
    I like rig grease for long term storage.

  12. #12
    Boolit Master
    Dragonheart's Avatar
    Join Date
    Jan 2012
    Location
    Katy, Texas
    Posts
    1,632
    If you want to be absolutely sure your ferrous items are protected for an indefinite period of time. Give the parts a coat of wheel bearing grease. If there are any sharp edges wrap with a layer of heavy plastic then seal the items in a vacuum sealer bag. The layer of plastic helps to keep sharp points or edges from puncturing the bag when the vacuum draws tight. If you want even more security drop an oxygen absorber into the bag just before sealing. Things you seal this way will be kept in the same condition for years just like the day they were sealed. Items will be protected even from a flood. Vacuum bags work great for sealing up keeper ammunition, tools, molds, guns, etc. etc.

  13. #13
    Boolit Master

    merlin101's Avatar
    Join Date
    Mar 2010
    Location
    Rochester NY heading to Gaults Gulch
    Posts
    1,174
    Wrap them or at least cover them with vapor paper I think it's called VCI paper. I bought a dozen or so sheets cheap on ebay and never looked back! If you want to spend more money buy a thermos electric cooler/heater and keep them in there on the warm setting.
    It's not the years in your life that count. It's the life in your years (Abe Lincoln)

    "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government. George Washington

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check