RepackboxGraf & SonsTitan ReloadingStainLess Steel Media
RotoMetals2MidSouth Shooters SupplyWidenersLee Precision
Inline Fabrication
Results 1 to 16 of 16

Thread: PC baking techniques

  1. #1
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    343

    PC baking techniques

    I have great luck standing up my .45-70 slugs to bake them. However, .30 cal and smaller start to be a pain. I have tried the pile method and just laying them one layer at a time, but havenít gotten the results I like.

    Has anyone found a different and efficient way to load boolits into the oven. Is there some sort of jig that can be used? Iím open to all ideas for boolits that are much longer than they are wide.

    Thanks

  2. #2
    Boolit Master RKJ's Avatar
    Join Date
    Jan 2009
    Posts
    717
    See if they have a silicone baking pad that will fit them. I've used one for 23 and it worked good. I'd bet Amazon or Walmart would have something.

  3. #3
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    343
    Quote Originally Posted by RKJ View Post
    See if they have a silicone baking pad that will fit them. I've used one for 23 and it worked good. I'd bet Amazon or Walmart would have something.
    What do you mean exactly about a silicone pad that will fit them. I do happen to use a normal flat silicone pad to stand them on. Is there something else? Maybe with holes in it? Even with the pad I get imperfections more than I feel are acceptable when they are on their sides.

  4. #4
    Boolit Master

    sparky45's Avatar
    Join Date
    Apr 2010
    Location
    SE, KS
    Posts
    1,758
    Here's what I did yesterday. Coated with "shake and bake" method and placed on a drilled out block of Cedar wood covered with aluminum foil, nose down. Worked great!

    Click image for larger version. 

Name:	bullets3.jpg 
Views:	31 
Size:	56.5 KB 
ID:	230176

  5. #5
    Boolit Master
    Join Date
    Feb 2015
    Location
    Central Iowa
    Posts
    707
    There's a sticky thread in this sub forum that has many ideas.

    I use the same cheap metal tray that came with my toaster oven, but I've had bullets fall over. If I'm real careful I can load them into the oven with out having any tip over. The non stick Reynolds wrap needs to be in pretty good condition also.
    Last edited by reddog81; 11-09-2018 at 09:38 PM.

  6. #6
    Boolit Grand Master popper's Avatar
    Join Date
    Jun 2011
    Posts
    7,810
    Silicon mats that look like a waffle grill. She gave me one, next try is baking standing on the hot plate till flow, then after cool, dump on silicon mat and oven cook.
    Whatever!

  7. #7
    Boolit Buddy
    Join Date
    May 2016
    Location
    NW Oklahoma
    Posts
    184
    Look an amazon for silicone trivets. You will see the ones that have square or octagonal indentions on both sides. They measure about 7"X 7". The square ones with 20 holes along each side are perfect for 30 cal. They are roughly 3 holes per inch. The ones with 4 holes per inch will fit 22 cal maybe 243

  8. #8
    Boolit Master



    MUSTANG's Avatar
    Join Date
    Jan 2012
    Location
    Moapa, Nevada or Kalispell, Montana
    Posts
    1,240
    I use Silicone Trivets for .30 Caliber Cast Boolits. I size the boolit and seat the gas check, then Powder Coat (Tumble) then use a set of forceps to place the Boolits in a cell - I space them so there is an empty cell on each side so no boolits will touch another. Works well for me.


    I prefer the ones with an octagon shape such as this for .30 Caliber boolits:

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    These square ones work well also; but they are not my first choice.

    https://www.amazon.com/silicone-mult...HPVB2X5ED7GWFC
    Mustang

    "In the beginning... the patriot is a scarce man, and brave and hated and scorned. When his cause succeeds, the timid join him, for then it costs nothing to be a patriot." - Mark Twain.

  9. #9
    Boolit Buddy
    Join Date
    May 2016
    Location
    NW Oklahoma
    Posts
    184
    Thanks for the info on the ones with octagon trivets MUSTANG!! Couldn't find those when I purchased mine with square shape. They work pretty well but the octagon looks like it would hold 30 cal better. Been trying to use the square for LEE 8MM Karibiner without gas check, but they try to pop out untill the trivet heats up.

  10. #10
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    343
    Quote Originally Posted by MUSTANG View Post
    I use Silicone Trivets for .30 Caliber Cast Boolits. I size the boolit and seat the gas check, then Powder Coat (Tumble) then use a set of forceps to place the Boolits in a cell - I space them so there is an empty cell on each side so no boolits will touch another. Works well for me.


    I prefer the ones with an octagon shape such as this for .30 Caliber boolits:

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    These square ones work well also; but they are not my first choice.

    https://www.amazon.com/silicone-mult...HPVB2X5ED7GWFC
    Well I never thought there would be silicone trivets, let alone so many different types I ordered several and will see what works best.

    Thanks to all for the info. I never would have thought of it.

  11. #11
    Boolit Buddy
    Join Date
    May 2016
    Location
    NW Oklahoma
    Posts
    184
    You will have to use forceps or heavy tweezers to get the boolits into the cavities but once there they will stay upright. A great way to cure your 30 caliber. You can size and install gas checks and then coat and bake. Lot of innovation and research here on this site.Thanks to all of the pioneers that made PC possible for everyone.

  12. #12
    Boolit Bub
    Join Date
    May 2005
    Location
    NH
    Posts
    41
    I cut the Bottom off plastic trays from the boxes of ammo
    Then stand the tall Bullets up in the trays on a flat top hot plates with nonstick aluminum foil
    Then turn the hot plate on at 400 for about 20 minutes then they’re done works great for me
    No oven is needed
    Don’t forget to remove the plastic tray
    Mike
    Last edited by MR45; 11-10-2018 at 07:02 AM. Reason: Add ps

  13. #13
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    343
    While I have everyone’s attention, what about gas checking PC boolits. I have been doing it after PCing, because to size and gas check my boolits, I lube them. If this is done first, I risk the powder not sticking to the boolits. I had that problem once before and rinsing twice with acetone wasn’t enough for the powder to stick. If I don’t lube, don’t I risk having lead gauling in my sizer?

    Thanks

  14. #14
    Boolit Buddy
    scotner's Avatar
    Join Date
    Oct 2016
    Location
    VA
    Posts
    135
    Assuming they are long enough you can use wire screen to hold them.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20180923_173110.jpg 
Views:	13 
Size:	55.0 KB 
ID:	230222  

  15. #15
    Boolit Buddy
    Join Date
    Feb 2018
    Posts
    343
    Quote Originally Posted by MR45 View Post
    I cut the Bottom off plastic trays from the boxes of ammo
    Then stand the tall Bullets up in the trays on a flat top hot plates with nonstick aluminum foil
    Then turn the hot plate on at 400 for about 20 minutes then they’re done works great for me
    No oven is needed
    Don’t forget to remove the plastic tray
    Mike
    That’s a really interesting way to do it. Especially for someone just starting and wanting to keep costs down. I wonder if anyone else has tried it.

  16. #16
    Boolit Buddy
    Join Date
    Sep 2017
    Location
    Utah
    Posts
    157
    I started powder coating with 9mm bullets. I would shake them in the plastic container and then insert them nose down into an empty 9mm ammo tray. I could then place the oven tray on top of the ammo trays, invert the whole thing, and I’d have 50, 100, or 150 bullets perfectly spaced and standing on their bases ready to bake.

    When I started doing .223 bullets, I ended up 3D printing a similar “ammo tray” type thing that holds 150 bullets or so. Works great. Just have to be really careful moving the tray if the bullets are tall or narrow enough to easily tip over.
    Currently in the process of developing the "perfect" cast .223 load for my AR-15. Click here to follow my progress

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check