what is the size of the hex wrench for the lock screw of the castle nut?
thanks kurt
what is the size of the hex wrench for the lock screw of the castle nut?
thanks kurt
Originals were metric.....so a 15mm should fit.
Sometimes a 1/16 many times fits.
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
thanks for the reply, this is for a norinco rifle with what I think is a US flash hider, took the screw out with the 1/16 wrench ,but not right size, to loose but cant find the right size to put it back correctly.
thanks
kurt
Get a new set screw the one I had was so soft it wouldn't take a retorqueing.
Can't remember the size, since removed it.
When you read the fine print you get an education
when you ignore the fine print you get experience
My Norinco had a soft set screw as well. I have to baby it taking it in and out. Some day I will have to get a new one
I was a dog on a short chain.
Now there's no chain.
Jim Harrison
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |