Inline FabricationMidSouth Shooters SupplyRotoMetals2Graf & Sons
Titan ReloadingRepackboxWidenersStainLess Steel Media
Lee Precision
Results 1 to 9 of 9

Thread: Henry 45 Colt carbine bullet

  1. #1
    Boolit Bub
    Join Date
    May 2010
    Posts
    69

    Henry 45 Colt carbine bullet

    I did a cursory search but didn't find much. Any you guys who own Henrys do a cast of your chamber? I was hoping someone with a 45 carbine might share their numbers with me so I don't have to buy some Cerrosafe. I already have a Mihec 45 Colt Ruger mould and I'm hoping it will work. Lots of nose options from flat nose to extreme hollow point. I believe it throws 454, should be able to size down to 452...if the Henry throat is about that size. Thanks for any input from the members.

  2. #2
    Boolit Master MyFlatline's Avatar
    Join Date
    Oct 2014
    Location
    Crystal River Florida
    Posts
    864
    I use a Accurate mold, 45-255A, size at .454 and have very good results.


  3. #3
    Boolit Bub
    Join Date
    May 2010
    Posts
    69
    Thanks MyFlatline. All information is helpful. I plan on loading hunting loads primarily... at least right now. Did you ever do a chamber cast? Got throat dimensions? I plan on using IMR 4227 but I've got Re7, 296, 2400 and Lil Gun.

  4. #4
    Boolit Master MyFlatline's Avatar
    Join Date
    Oct 2014
    Location
    Crystal River Florida
    Posts
    864
    No Sir, I hit it right off with Unique and saw no reason to change. All I did was slug the bore, no chamber cast. I talked back and forth with Tom at Accurate and he was spot on.

    Not sure what you mean by hunting loads, but the 45 colt is the only round to travel the 24"'s in my bullet trap and tap the steel. The 308 MX only makes about 8"'s.

    Best of luck.

  5. #5
    Boolit Bub
    Join Date
    May 2010
    Posts
    69
    Hunting loads to me means, heavy-for-bore bullet at the highest REASONABLE velocity with REASONABLE accuracy within 100 yds. Ideally, I'd like to use the same bullet I cast for my Ruger Bisley 45. I got it here in a group buy a few years back. The length of the bullet is designed specifically for Ruger cylinders. Not a thing wrong with playing and punching paper, I just wouldn't hunt with those rounds. For playing I'd use another bullet and some quick pistol powder like you did.

  6. #6
    Boolit Buddy
    Join Date
    Jan 2016
    Location
    Glen Dale WV
    Posts
    123
    I don't have any chamber measurements but in my henry I shoot a noe 454-290-rf bullet sized 454 with unique and 296 with good results .

  7. #7
    Boolit Master MyFlatline's Avatar
    Join Date
    Oct 2014
    Location
    Crystal River Florida
    Posts
    864
    Quote Originally Posted by 30calpal View Post
    Hunting loads to me means, heavy-for-bore bullet at the highest REASONABLE velocity with REASONABLE accuracy within 100 yds. Ideally, I'd like to use the same bullet I cast for my Ruger Bisley 45. I got it here in a group buy a few years back. The length of the bullet is designed specifically for Ruger cylinders. Not a thing wrong with playing and punching paper, I just wouldn't hunt with those rounds. For playing I'd use another bullet and some quick pistol powder like you did.
    That's where we differ..I want the highest accuracy, as velocity in that size bullet really has little bearing. As I mentioned, it has more penetration than any other caliber or load that I do. That includes the 444. BTW, that is my hunting load.

  8. #8
    Boolit Bub
    Join Date
    May 2010
    Posts
    69
    Mike69 454 seems a bit 'big' for 45 Colt chamber but...if it works and it's not difficult to close the action...hey! And MyFlatline, to differ is OK. Wouldn't it be boring if we all agreed? Nothing would ever improve or change.

  9. #9
    Boolit Master

    Join Date
    Feb 2009
    Location
    N. E. Ohio
    Posts
    1,025
    30calpal, most new .45 colts are .454 cal. not the older .452. So the smaller size is under bore dia. for most newer guns.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check