StainLess Steel MediaInline FabricationRepackboxTitan Reloading
MidSouth Shooters SupplyLee PrecisionGraf & SonsWideners
RotoMetals2
Results 1 to 7 of 7

Thread: Safe loads for Danish 8X58R Rolling Block

  1. #1

    Question Safe loads for Danish 8X58R Rolling Block

    I have been on goggle looking for info. And ran across this forum with old posts from around 2006 or so. If anyone could help with good low pressure (under 28000) I would
    Appreciate the help

  2. #2
    Boolit Master
    Join Date
    Mar 2005
    Posts
    3,629
    Go over to gunboards forums.
    There is a Danish rifle sub forum. Basically you need the low pressure data published by Norma.
    EDG

  3. #3
    The 8x58RD Rolling block is SWEDISH!
    Not to be confused to the same cartridge 8x58RD loaded in the DANISH Krag Repeater that was loaded considerably hotter!
    Be careful out there!

  4. #4
    Boolit Master
    Join Date
    May 2016
    Location
    Denmark (a greasy little spot in Scandinavia)
    Posts
    588
    For the original Danish Krag rifle the Arsenal set max. pressure to 2600bar~37.7kpsi
    That load destroyed Rolling Blocks in short order and a max. pressure of 1600bar~23.3kpsi was deemed safe.

    The 8x58RD cartridge was put into use in 1889 by the Danes but the Norwegians started to use it in their Kongsberg RB's in 1888.
    The Swedes followed with their RB's in 1889 and the Danes converted a small number og RB's in 1893.

  5. #5
    Boolit Master




    Boz330's Avatar
    Join Date
    Jul 2006
    Location
    Central Kentucky
    Posts
    3,730
    I don't remember the load but 4759 gave me the best results with a 225gr boolit. Possibly around 18gr but DO NOT take that as gospel. That is a pretty low pressure load in a 303 Enfield though.

    Bob
    GUNFIRE! The sound of Freedom!

  6. #6
    Boolit Master Reverend Al's Avatar
    Join Date
    Feb 2013
    Location
    Victoria, B.C., Canada
    Posts
    1,359
    I've been shooting an old Lyman / Ideal .323471 with a weight of about 215 grains over a similar load of SR4759. It is a mild load and my Swedish Roller shoots it well. Even that very long boolit needs to be seated WELL out of the case to get anywhere near the throat on my rifle, which I understand is quite common from what I've read about these rifles. If you take the time to read through the sage comments written by the "Dutchman" regarding these rifles and the 8x58R cartridge you'll be far better educated on what you should and should not be loading in these old Swedish Rollers.

    http://dutchman.rebooty.com/rb.html

    Last edited by Reverend Al; 11-04-2018 at 02:07 PM.
    I may have passed my "Best Before" date, but I haven't reached my "Expiry" date!

  7. #7
    Boolit Master enfield's Avatar
    Join Date
    Feb 2007
    Location
    Nova Scotia
    Posts
    705
    yes, 17 to 20 gr 4759 works well. I shoot the Lee .330 and an NOE .326 215 gr

    hey, watch where ya point that thing!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check