RepackboxWidenersInline FabricationRotoMetals2
Graf & SonsLee PrecisionMidSouth Shooters Supply

Results 1 to 2 of 2

Thread: win 92 safety remove

  1. #1
    Boolit Mold
    Join Date
    Jan 2016

    win 92 safety remove

    What would I have to do to put the blank off piece in the tang and put the hammer back to the half cock notch?

    thanks kurt

  2. #2
    Boolit Master pietro's Avatar
    Join Date
    Mar 2008
    New England

    After the tang safety mechanism is removed, the recess in the tang for the safety button can be filled in myriad ways, like attaching a filler piece via soldering, welding (both of which would require a re-finishing to the receiver) or epoxying.
    The welded piece can be re-finished so that the alteration's invisible, the soldering/epoxy less so.

    To change the rebounding hammer to a half-cock version, the lockworks would need to be replaced with Browning or Rossi Model 92 parts, altering the hammer for function, and ideally replacing the inertia firing pin with a full-length FP, ala the original Winchester Model 1892's.

    Experience is a wonderful thing - It lets you recognize a mistake, when you make it again.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check