VS Dillon Powder feed quick disconnect

[Handloader109]

Don and Dave, they are on the way along with Sparky's

[TheDoctor]

I'll take one in black.

[Walter Laich]

sent you a PM about the SDB prototype.

removed the threads from screw and working fine. came up with a routine in using it.

holds very securely in my test run of 25 .45 Colt cartridges

here is a link to pictures of it on the machine (which I call "Ralph"):
https://www.flickr.com/photos/157294...57703116385634

[Handloader109]

Got the payments for the two members that had mailed to me. Going out in morning mail. Test parts for Square deal out this morning to my two testers. Stay tuned for those. Have more of the originals. Thanks

Sent from my SM-G892A using Tapatalk

[Handloader109]

Bump for weekend, and added the SDB / Powder alarm disconnect

[Walter Laich]

The one for the SDB is really a great add-on for the machine.

I've loaded over 500 rounds and no problems at all

came up with a routine to make change outs quick:

1. Lower handle to give slack to failsafe rod
2. pull pin off of failsafe rod
3. hold powder measure (PM) in left hand.
4. pull out disconnect--only needs a few thousandths to be clear
5. raise PM free of the round powder die
6. rotate PM slightly to so faisafe rod clears disconnect

In "real time" takes 10 seconds to remove or reinstall PM and . . .

No loose parts to hit the floor, never to be seen again!

[Walter Laich]

do you offer bulk order prices on these?

[Handloader109]

Multiples, dual screw, 650xl version, $15 for first, add $9 for each additional.
Single screw version, SDB, $13 first, $7 for each additional.



Sent from my SM-G892A using Tapatalk

[ripper90]

Powder feed disconnect

I will take one in Brown if you have it if not any color will do. Send Pay pal information.
Ripper90