Was gifted a lb and 1/2 of the old AA8700 powder. Thinking this powder might work well in a 30-40 krag Rem RB built on a Rolling Block smokeless powder action. Like to use either the Lyman 311284 or 314299. Any loads out there?
Was gifted a lb and 1/2 of the old AA8700 powder. Thinking this powder might work well in a 30-40 krag Rem RB built on a Rolling Block smokeless powder action. Like to use either the Lyman 311284 or 314299. Any loads out there?
If this is the same burn rate as WC870 I use 50 grains +/- in my Krag with 311284 and 60 in my 50-70's and 45-70's. Cheap fun.
Expect some zombies in the chamber. The 311284 seems to clean the chamber out pretty well. I just shoot and don't worry about the zombies left behind.
I have found that a good stiff alloy works better in the Krag with that boolit and that load. That's what I do, use at your own risk!
Let us know how you make out.
Mark
Checked my Accurate manual and only found one load for cast for 8700.
180 gr.RNGC 47.7gr.----53.0gr.MAX
Last edited by swamp; 10-30-2018 at 07:32 PM.
There is no problem so great, that it cannot be solved by the proper application of high explosives.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |