Inline FabricationGraf & SonsLee PrecisionStainLess Steel Media
WidenersRotoMetals2MidSouth Shooters SupplyTitan Reloading
Repackbox
Results 1 to 7 of 7

Thread: Need advice ref orignal Ballard in 38-55

  1. #1
    Boolit Mold
    Join Date
    Mar 2011
    Location
    Sammamish, WA
    Posts
    2

    Need advice ref orignal Ballard in 38-55

    Hi, its been a while since I have been here but I am looking for some guidance. I am still getting into the single shot rifle shooting and recently got an original Ballard in 38-55. It is safe to shoot and has a nice bore but when I swaged it the bore sized out to .386/.387. I thought "oh boy...its shot out!! But in examining it I see it has nice rifling all the way down the bore and in swaging it, the lands printed nicely and neatly.

    Would this mean that I would have to shoot a paper patched bullet seeing as how I cannot find any cast bullets of this size? And how do I get to size my brass to fit this diameter bullet with the dies I have? does anyone know of an outfit that will make me an expander? I bought a Redding in size .379 but that isn't going to be big enough is it...


    Thanks in advance for your time.

    Ben

  2. #2
    Boolit Buddy bosterr's Avatar
    Join Date
    Dec 2011
    Location
    Western Pa.
    Posts
    497
    Look at the Accurate Molds site. Tom will make anything and any size you want, that means diameter too.

  3. #3
    Boolit Master
    bigted's Avatar
    Join Date
    Mar 2009
    Location
    Sweet Home Oregon
    Posts
    3,783
    Yep Tom would help you rite out with any size needed.

    Have you fired it yet? Just curious as to what your chamber is like. That sure seems like a overly big diameter and bettin you will never be able load a boolit that big in a case AND chamber it. May have a muzzle loading rifle that you load the boolit down the barrel and seated on a powdered case with a wad crimped in the mouth. Muzzle loaded boolits like this have been very accurate having been engraved on the trip down the barrel to seat upon the wad and powdered case.
    WHEN ALL IS SAID AND DONE...MORE WILL BE SAID THEN DONE

  4. #4
    Boolit Master
    Join Date
    Dec 2014
    Location
    UPSTATE new york
    Posts
    749
    I may have something that big, I can check over the weekend.

  5. #5
    Boolit Master
    Join Date
    Dec 2014
    Location
    UPSTATE new york
    Posts
    749
    pm me if interested, I will probably forget where I saw thread

  6. #6
    Boolit Master
    Join Date
    May 2012
    Location
    Outside Rolla, Missouri
    Posts
    778
    Soft bullet cast as big as you can get in a case and pray for a big bump up? I bet you can get it to shoot well but it sounds as if it will take some work.
    "In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'

    The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery

    NRA Benefactor 2008

  7. #7
    Boolit Master
    Chill Wills's Avatar
    Join Date
    Oct 2011
    Location
    Colorado
    Posts
    1,965
    Quote Originally Posted by Berlin1960 View Post
    got an original Ballard in 38-55. It is safe to shoot and has a nice bore but when I swaged it the bore sized out to .386/.387. I thought "oh boy...its shot out!!

    Ben
    No offense meant, zero. But that is a very unlikely bore and groove. Are you sure?
    BTW, I assume you intend to mean 0.387" GROOVE diameter??? ...not bore diameter. Correct?

    My questions would be:

    Are you sure of the measurement?
    How did you measure? with a Micrometer?
    Did you just measure at the muzzle?
    Did you push a soft round ball all the way through from the chamber?
    Maybe did you take an undersized soft slug and somehow Swage or bump it up in the barrel and then push it out?

    It is an internet myth that the state of manufacturing, post civil war was that poor. Especially Ballard, they were very good at getting it right.

    I am not saying you are wrong, but from my own experience, I have had to go back and redo things that don't seem right.
    Like the carpenter; measure twice, cut once.
    Last edited by Chill Wills; 10-24-2018 at 10:14 AM.
    Chill Wills

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check