I've been wanting to use a 70s vintage Weaver K4 that I recently bought so I mounted it on my 8x57mm. I also cleaned said rifle(horrors!) Well, I skipped bore sighting and fouled the bore at 40 yds with my current cb load (Lee 175gr/9.5gr Red Dot). Noting the windage was fine, the impact low, I decided to try my new fullpower load(170grSST/53grCFE223) on iron at 100 yds. Then back to 40 yds I used the picket point of the dual-x and grouped 3 more of the CB loads.
I never took off the scope caps.
Sent from my SAMSUNG-SM-G930A using Tapatalk