Graf & SonsWidenersRotoMetals2MidSouth Shooters Supply
Lee PrecisionInline FabricationStainLess Steel MediaTitan Reloading
Repackbox
Results 1 to 9 of 9

Thread: Alloy lead question

  1. #1
    Boolit Buddy ROCKET's Avatar
    Join Date
    Jun 2011
    Posts
    109

    Alloy lead question

    Found some printers lead dyes from a rotary letter press. What alloy would that be ?

  2. #2
    Boolit Master Grmps's Avatar
    Join Date
    Jul 2016
    Posts
    2,730
    Pictures would be really helpful, Not understanding "printers lead dyes"

    are you talking Linotype -- strips of words?


    or monotype, individual letters?

  3. #3
    Boolit Buddy ROCKET's Avatar
    Join Date
    Jun 2011
    Posts
    109
    Like these....

    Click image for larger version. 

Name:	c447f9b8-63c0-4cb4-b2fa-464b8d13a3f6.jpg 
Views:	25 
Size:	49.7 KB 
ID:	228742
    Click image for larger version. 

Name:	3f2ba3d3-1398-456b-9816-3acdcd50efda.png 
Views:	23 
Size:	184.8 KB 
ID:	228743

  4. #4
    Boolit Master 243winxb's Avatar
    Join Date
    Aug 2005
    Location
    USA
    Posts
    1,512
    The color looks like there is a high percent of copper? May not be good for casting in a bottom pour pot? Likes to plug it.

    Babbitt alloy with copper needs lots of heat. Or thin by adding scrap lead.

  5. #5
    Boolit Buddy
    Join Date
    Dec 2012
    Location
    North West Ohio
    Posts
    380
    I am thinking more of red ink staining but who knows.i have some stuff like that to.I think the only way to know is have it tested.

  6. #6
    Boolit Buddy
    Join Date
    Sep 2016
    Posts
    304
    Elbow grease, some acetone (or soap and water for water soluble dyes) and a brush would show if it was ink on the surface, wouldn't it? Of course, even if the red color comes off, you still don't know the alloy composition, unless there is some standard.
    Last edited by kevin c; 10-14-2018 at 12:06 AM. Reason: Dratted autocorrect

  7. #7
    Boolit Master


    Join Date
    Oct 2011
    Location
    Atlanta, NY 14808
    Posts
    1,271
    Even if there is a standard, use can deplete one or another of the elements in the alloy. Test to be sure, or experiment-at your own risk of course.
    Micah 6:8
    He hath shewed thee, O man, what is good; and what doth the LORD require of thee, but to do justly, and to love mercy, and to walk humbly with thy God?

    "I don't have hobbies - I'm developing a robust post-apocalyptic skill set"
    I may be discharged and retired but I'm sure I did not renounce the oath that I solemnly swore!

  8. #8
    Boolit Buddy Went2kck's Avatar
    Join Date
    Nov 2014
    Location
    overland park KS
    Posts
    127
    Toss it in a pot, melt it down try to cast it. if it don't cast toss it to the trash. If it casts good then toss it down range.

  9. #9
    Moderator Emeritus

    MaryB's Avatar
    Join Date
    Jun 2013
    Location
    SW Minnesota
    Posts
    8,152
    Test with acid! They did use zinc for things like that...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check