Graf & SonsStainLess Steel MediaInline FabricationTitan Reloading
WidenersLee PrecisionMidSouth Shooters SupplyRotoMetals2
Repackbox
Results 1 to 5 of 5

Thread: TCR83 forend?

  1. #1
    Boolit Buddy
    Czech_too's Avatar
    Join Date
    Nov 2009
    Location
    Ohio
    Posts
    434

    TCR83 forend?

    I recently picked up a TCR83 w/two barrels, 22 Hornet & 22-250. I'm liking it so much that if I was to find more barrels I just might buy 'em.

    Question I have though is whether or not the forend is attached the same on the 87 as it is on the 83?

    I've downloaded the disassembly instructions off of Gun Digest, but the clarity of the pictures is such that I can't make out the forend mounting.
    Based upon what I've read the barrels are interchangable, and yes, I do know that some barrels should only be used on MAG marked frames.
    Any input would be appreciated.

    Brian
    Cruffler

    genealogy, another area of interest

    feedback - http://castboolits.gunloads.com/show...9613-czech_too

  2. #2
    Boolit Buddy
    Join Date
    Aug 2009
    Posts
    145
    The fore-ends, like the barrels, are completely interchangeable.
    Last edited by HATCH; 10-10-2018 at 02:26 PM. Reason: remove rule violation

  3. #3
    Boolit Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    3,250
    .


    Some TCR-83/TCR-87 forends are not interchangeable - particularly the forends for the 12ga bbl, once available from the old T/C Custom Shop (Fox Ridge Outfitters), and the FE's meant for any optional (Custom Shop) heavy barrel.

    .
    Experience is a wonderful thing - It lets you recognize a mistake, when you make it again.

  4. #4
    Boolit Buddy
    Join Date
    Aug 2009
    Posts
    145
    True (and I would think, obvious) enough.
    My statement dealt with the method of attachment, rather than the barrel channel size, and that is what the OP was asking.

  5. #5
    Boolit Mold
    Join Date
    Jul 2018
    Location
    Green country Oklahoma
    Posts
    19
    Extra barrels are around you just have to hunt and hunt and hunt to find them took me 7 years to find a 308 three years for a 7mm08

    Deaconllb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check