Titan ReloadingRotoMetals2Lee PrecisionInline Fabrication
MidSouth Shooters SupplyRepackboxWidenersGraf & Sons

Results 1 to 4 of 4

Thread: 310 tool advice, please

  1. #1

    310 tool advice, please

    On the old 310 dies, do the seating die stems for cast bullets correspond with the top punch number linked to the different cast bullet molds?

    I noticed that the seating stem for 38 round nose bullets is 311 (the same as the lubrisizer top punch). Does anyone know which seating stem I would use for wadcutters or semiwadcutters?

    Thanks in advance!

  2. #2
    Boolit Master
    Join Date
    Mar 2014
    St. Louis

  3. #3
    Boolit Master

    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Somewhat. Not always. I can decode them for you.

  4. #4
    Boolit Grand Master Char-Gar's Avatar
    Join Date
    Mar 2005
    Deep South Texas
    This is not an answer to your question about 310 tools, but I turn the seating screws dead flat for use on SWC and WC bullets. They work with any bullet with a flat on the nose. I do this with 310 dies as well are the larger ones.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	004.jpg 
Views:	3 
Size:	38.5 KB 
ID:	227976  
    Disclaimer: The above is not holy writ. It is just my opinion based on my experience and knowledge. Your mileage may vary.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check