I am looking for a simple to make softer than my normal alloy(95.3-2.3-2.6) for 30-06/200 flat nose and 30-30/150 flat nose, all wearing gas checks. I tried the aka-50/50 plus 2, but could only get about 3 to 4 shots before group busting leading occurred. My normal alloy is about 14.4 to 14.9 brinell. I also tried 20:1 which I use for my handgun hollowpoints and also no accuracy and leading.
First question is; will 16:1 or 10:1 handle velocity in the 1750 to 1850 range?
Second question is; will my normal alloy,2.3 tin and 2.6 antimony roll the boolit nose on a whitetail out to 100 yds. This alloy will shoot MOA at 100 with the ought six using 314299 boolit and I have an accurate mold which is the flat nose version.
I have pure tin and superhard and pure soft lead and can make any thing I need. Also I did not water drop my 50+2/50 so I'm sure that didn't help, too much trouble, if I can just mix and cast that is what I would prefer. The ought six is 1:10 and have both 30-30's 10 and 12 twist and also feeding 3 35 remington, 336 marlin's for family members.
Thanks
Tony