MidSouth Shooters SupplyInline FabricationGraf & SonsWideners
Titan ReloadingStainLess Steel MediaRotoMetals2Lee Precision

Results 1 to 5 of 5

Thread: I'm building a 458 socom upper, mid or carbine length gas system?

  1. #1
    Boolit Master gnostic's Avatar
    Join Date
    Jan 2014
    Location
    Somewhere over the rainbow...
    Posts
    318

    I'm building a 458 socom upper, mid or carbine length gas system?

    I'm building a 458 socom upper with a 1:14, 16" barrel with brake and adjustable JP gas block. When ordering a barrel, should I order a mid, or carbine length gas system? The 458 is a low pressure round and reliability could be an issue mid length and the shorter carbine system might shred my very expensive brass. My only AR 15 is a mid length, M-4ish 5.56 and it's easy on my brass, compared to my mini 14 and 30. It would be good if the 458 socom was easy on the brass as a case costs close to a buck...

  2. #2
    Boolit Man

    Join Date
    Feb 2011
    Location
    Oklahoma
    Posts
    143
    Carbine is all you need. If you haven't bought your barrel buy one from Tromix along with his bolt. He made the first 458 socom and his prices are good.
    Last edited by DDriller; 09-13-2018 at 10:06 PM.

  3. #3
    Boolit Master
    DCM's Avatar
    Join Date
    Dec 2010
    Location
    Upper midwest
    Posts
    1,616
    The carbine length gas system functions well IME.
    "Don't worry what they think. In the end it is not between them and you, it is between you and God."

    Je suis Charlie!


    "You won't know until you Actually try it"

    "The impossible just takes longer."

    "Don't let them beat you down with their inexperience."

    "You'll never accomplish what you don't try. " - Moldmaker

  4. #4
    Boolit Man
    Join Date
    May 2016
    Location
    Near the Keg
    Posts
    101
    I went down he road of building my own upper with an adjustable gas block and a bunch of expensive internals. Took a long time to get it to function right. I finally bought a complete Tromix upper and it ran great from day one. Now I have my home-built upper dedicated to heavy, suppressed, subsonic rounds and my Tromix for everything else.

    If I had it to do over, I would have just done a Tromix upper build and saved a bunch of money and time getting it right.

    But the "journey" was educational and fun.....
    Alcohol Inventory Reduction Specialist (Journeyman Level)

  5. #5
    Boolit Master gnostic's Avatar
    Join Date
    Jan 2014
    Location
    Somewhere over the rainbow...
    Posts
    318
    Thanks for the response, I've been to Tromix's website and might buy the barrel and bolt from them. I probably would have come out ahead buying a whole upper from Tromix, had I not already started picking up bits. Carbine length gas system is what I'll buy, thanks again...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check