RepackboxGraf & SonsInline FabricationStainLess Steel Media

Results 1 to 4 of 4

Thread: Anyone 3D Printing AR-15 Armorer's Blocks & Fixtures?

  1. #1
    Boolit Grand Master

    DougGuy's Avatar
    Join Date
    Apr 2013
    just above Raleigh North Carolina

    Anyone 3D Printing AR-15 Armorer's Blocks & Fixtures?

    I have a few .stl files that I would like to get printed to use in AR builds, I can email the files as I am not sure if we can post files on the forum.

    A vise block that holds the lower securely in a vise, a hammer block that lets you dry fire against the block without damaging the lower receiver, a block that holds the lower receiver while you drive in (or out) the trigger guard retaining pins, and an upper block that holds the upper securely in a vise that is a safe and correct way to hold it while installing or removing a barrel.

    I would be very interested in having these tools made fairly quickly if possible..
    Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throat reaming? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? Shoot me a PM! Also on Facebook:

  2. #2
    Boolit Master
    lefty o's Avatar
    Join Date
    Dec 2012
    ive seen chinese knockoffs online for about $10, probably cant print the stuff for that.

  3. #3
    Boolit Master
    DCM's Avatar
    Join Date
    Dec 2010
    Upper midwest
    Quote Originally Posted by lefty o View Post
    ive seen chinese knockoffs online for about $10, probably cant print the stuff for that.
    Sad but true.
    "Don't worry what they think. In the end it is not between them and you, it is between you and God."

    Je suis Charlie!

    "You won't know until you Actually try it"

    "The impossible just takes longer."

    "Don't let them beat you down with their inexperience."

    "You'll never accomplish what you don't try. " - Moldmaker

  4. #4
    Boolit Master flyingmonkey35's Avatar
    Join Date
    Apr 2014
    While I can print it. It would not hold up. You want a injection molding part. The 3d printed one would most likely be snap it crack with the pressure of putting a barrel on. + Cost wod be at minuime 25 bucks for a roll of petg.

    I could do the hammer block and guide though those should fair ok.

    Sent from my N9560 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check