StainLess Steel MediaInline FabricationMidSouth Shooters SupplyWideners
Graf & SonsTitan ReloadingLee PrecisionRotoMetals2

Results 1 to 6 of 6

Thread: My 35 whelen carbine canon is done!

  1. #1
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    Southwest, Wisconsin
    Posts
    1,237

    My 35 whelen carbine canon is done!

    My special order 2018' Remington 7600 35 whelen carbine came about a month or so back. I ordered a factory grey laminate stock set made around 06' from numerics gun parts. I went through three stock sets from them...the first two boxes looked like a reach ran them over and the stocks were damaged. The third I had to buff out a few scratches and there also was a little clear chipped off around the edge of the black pistol grip. Numerics said that was the best stock they had in inventory and they've been "tossed" around on the shelves over the years of collecting dust. They are the only place on the planet that had them and I have a 7600 carbine twin in 35 rem I bought for my dad when the last special run was done in 06' and I sweet talkeded the dealer at the time to do a stock switch to grey lamite from wood grain so I wanted matching rifles. The stock swap was around $60-80 of I remember at the time. I really wish Remington did this run with the normal 22" barrel but I was just excited to be able to get a 7600 chambered in 35 whelen that I pulled the trigger on the purchase the second I found out they were available. A 22" barreled version will be on my bucket list yet.

    I didn't put quickie see throughs on it this time around...I had a set for some reason laying around in my gun parts. Instead I ordered a "Low" DNZ mount to give it a modern look. I bought a DNZ mount and have it on my savage 220 slugger and like it. The 220 will shoot sub MOA at a 100 yards with Remington 3" accutips so I trust the mount.

    I wanted a good field of view so I went with a Nikon pro staff 5 2.5x10 40 mm. There was plenty of clearance between the bell and the barrel. I was going to go with a quick detach set up but figured I'd never take the optic off anyways and wanted it at solid as possible with the caliber I chose.

    I polished the trigger group and added a lighter trigger spring. It still has travel but now brakes a 2 lbs.


    I just have to figure out what kind of sling mount I want to go with now. Don't know if I want a barrel clamp like my old faithful 84' 30-06 it's sitting next to. I just have to clean the barrel and head to the range to get it sighted in. Hope it shoots as good as my 06'. With my 180 gr core loct reloads the 06' shot a .448" group at a 100 yards when I load tested it and it cloverleaved last year checking to see if it was sighted in.

    The trigger guard is Metal but not like the steel using in my 84'. It seems to be a a lighter alloy that's painted. Some of the paint already rubbed off taking it out a few times playing with the trigger. I touched it up. At least it's not plastic. The new style magazine has a plastic bottom which looks cheap. I can't believe Remington cheapened and did this. The composite stock it came with had issues as well. The butt pad hung over the top and bottom by a quarter in both ways. They send me another. Both will now sit in a closet. The action tube had. 4" scratch which in time they all do after pumping so many times. Remington sent me a spare as well. I'll keep it till the present one gets unbearable to look at and then replace it. I'm on a mission for a couple old style all metal magazines. I'm not a big fan of how they put the serial number on the front face of the receiver with a "scan" box next to it either but I'm getting use to it. I bought a box of hornady super performance ammo to sight it in and have a couple boxes of 180gr Speer hot cores laying around, a 100 Remington new casings, and dies ready to go. Once the group buy closes on the 200 gr HP mold I'll be in business.







    Last edited by Tripplebeards; 09-06-2018 at 04:55 PM.

  2. #2
    Boolit Master
    Join Date
    Feb 2012
    Location
    Morganton, NC
    Posts
    944
    Nice! Be sure to get a muzzle blast pic!
    To Thomas Jefferson: It's America! We can have our plows AND our guns!

    http://lindsayfarmonsilvercreek.blogspot.com/

  3. #3
    Boolit Master
    Chad5005's Avatar
    Join Date
    May 2018
    Location
    Buena Vista GA
    Posts
    176
    ive got the predecessor to these,the 760 its a 67 model,its a 06,i really like the looks of the gray wood on your rifle

  4. #4
    Boolit Master

    nicholst55's Avatar
    Join Date
    Jan 2007
    Location
    Daegu, Korea
    Posts
    2,814
    FWIW, Boyd's makes an identical stock in your choice of laminate colors. In fact, they probably made that stock for Remington.
    Boycott YouTube

  5. #5
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    Southwest, Wisconsin
    Posts
    1,237
    Quote Originally Posted by nicholst55 View Post
    FWIW, Boyd's makes an identical stock in your choice of laminate colors. In fact, they probably made that stock for Remington.
    I wish Boyd’s was identical. It’s not even close or I would have bought theirs. The stock set was made by another company for Remington limited run firearms back in 2006. I researched it years ago when I bought the other set for my dads 35 rem. I called Boyd’s and Remington and both told me they me they didn’t make it. It was a place called Bob’s or something similar sounding. They did a really nice job on them. They are higher end than Boyd’s. I have a few Boyd’s and they’re really nice don’t get me wrong but the fit and finish is a hundred fold above them. The stock has a extremely thick hi gloss like like their old stocks of the day that is not done anymore. It has the factory logo Remington scroll engraved on the buttstock as well. The laminate has the factory stamped crosshatch in the wood grips like all wood and synthetics stocks did of the day. I had the stock set ordered the same day I ordered the firearm. It’s a OEM factory original limited edition stock set and not an aftermarket to keep the resale value on the rise instead of an aftermarket set that would do the opposite. It’s like buying a Cadillac with factory upgrades vs throwing a set of spinners on it from a parts store. Dose nothing but decrease the value and turns buyers off. Don’t get me wrong, I don’t plan on selling it but I would like to keep a limited run firearm even more desirable with factory upgraded options...if that’s even possible. A relative will be excited some day to inherit it. I would have liked the mate brown laminate set they made so our firearms could be a little different. I could find the brown laminate pump but the buttstock isn’t available anywhere. I have a hi gloss grey laminate 700 stock from my 300 RUM from the same company that came factory with it back in 2000’. I sanded the gloss with 600 grit sandpaper and bedded my 375 RUM in it.

    BTW the cheek weld on the stock lines up with the open sights perfectly. I read that the reason Remington and Grices designed it with a straight stock was for quick shooting and sight alignment and the raised comb is too high and blocks your eye alignment...not true.
    Last edited by Tripplebeards; 09-06-2018 at 09:56 PM.

  6. #6
    Boolit Master
    nekshot's Avatar
    Join Date
    Nov 2008
    Location
    swmissouri
    Posts
    2,837
    Thats a nice trombone. Should give a nice blast as you blase away!!
    Look twice, shoot once.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check