WidenersStainLess Steel MediaMidSouth Shooters SupplyGraf & Sons
Lee PrecisionRotoMetals2Titan ReloadingInline Fabrication

Results 1 to 7 of 7

Thread: buffer tube + springs for AR

  1. #1
    Boolit Master
    nekshot's Avatar
    Join Date
    Nov 2008
    Location
    swmissouri
    Posts
    2,837

    buffer tube + springs for AR

    I am very slowly building another AR for the 7.62x39. So far all I need is a barrel and bolt and buffer tube and every thing that it needs. Is spending money on a real good spring and fancy buffer with different weights advantageous?. I will be doing no hotrodding. I want a good cast boolit chucker and as light as I can keep it. I also think an adjustable low profile gas block would help with the tuning. Any thoughts to this build? Is carbine a good place to put gas block for this cartridge shooting lead?
    Look twice, shoot once.

  2. #2
    Boolit Master



    curator's Avatar
    Join Date
    Mar 2006
    Location
    Fort Myers, Florida
    Posts
    1,276
    nekshot,

    My 7.62X39 AR build has carbine length gas system (not adjustable) amd "standard" spring and buffer. It works great for 125 grain cast boolit (Lee 310/125 GC) loads ranging from about 1400 to 2000 fps using various fast to moderate rifle powders. (1680. RX7, IMR 3031, 4895) Accuracy is good and all function well. You need to work up your own loads for your gun.

  3. #3
    Boolit Master RU shooter's Avatar
    Join Date
    Nov 2006
    Location
    SW Pa.
    Posts
    1,801
    I wouldn't spend extra money on a fancy spring or buffer you can easily change the buffer weight yourself if needed heavier or lighter.
    If you find yourself in a fair fight, your tactics suck!

  4. #4
    Boolit Master

    SeabeeMan's Avatar
    Join Date
    Aug 2011
    Location
    Spooner, WI
    Posts
    529
    The flat springs really do reduce the "clang" you hear/fell from the action cycling, but nothing more than that.

  5. #5
    Boolit Master
    nekshot's Avatar
    Join Date
    Nov 2008
    Location
    swmissouri
    Posts
    2,837
    Ok, Thanks for input. I have been getting every thing at deep discounts but the barrel is a choke point. All barrels that are good quality name and discounted are 16 inch. I would like a 20 or at least a 18 incher.
    Look twice, shoot once.

  6. #6
    Boolit Master popper's Avatar
    Join Date
    Jun 2011
    Posts
    7,656
    Any reason for x39 vs 40WT, BO or 30-223? Longer barrel adds weight. Have you looked at KAK? I use adjustable GB on all my ARs, once set they stay there BUT I can change them. Carbine gas is the way to go for supers.
    Whatever!

  7. #7
    Boolit Master
    nekshot's Avatar
    Join Date
    Nov 2008
    Location
    swmissouri
    Posts
    2,837
    I have a 300 BO and it is very good to me but I really like the x39's. I have 2 bolt action(mauser and carcano) and a sks in x39, but I think a ar would be down right fun and accurate to boot. For some reason I cannot explain I like cast in the x39. I did find 18 and 20 inch barrels reasonable so I am saving my dimes for one of them. Not trying to be different just following my fun factor!
    Look twice, shoot once.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check