NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Those of you who dreamed of #000 Buckshot, please get me your details, so I can add you.
The rest of the requests have been added, thanks!
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
#000 will not fit in a wad but has great terminal effect.
A Teflon sleeve and a gas check and you are golden
put me down for the ooo as well, all details are in first post now.
if you are ever being chased by a taxidermist, don't play dead
3) zymguy - (1) 8 cav aluminum shot shell mold, #000 shot, << Need rest of details, please
zymguy at gmail DOT com
Man I hope we get the numbers to make this happen! Buckshot and slug are the loads for shotguns that save enough to really be worth doing for the casual shotgun user. And yes this is a bump.
Scrap.... because all the really pithy and emphatic four letter words were taken and we had to describe this source of casting material somehow so we added an "S" to what non casters and wives call what we collect.
Kind of hard to claim to love America while one is hating half the Americans that disagree with you. One nation indivisible requires work.
Feedback page http://castboolits.gunloads.com/show...light=RogerDat
All current new orders and details added.
I will ask HATCH to move this to the ACTIVE area. We now have 18 orders.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Duke add me please
Minerat - (1) 8 cavity aluminum shot shell mold, #0 shot size, SteveOB at outdrs dot net, 80003 Zip Code, 1 handles.
Steve,
Life Member NRA
Colorado Rifle Club member
Rocky Mtn Gun Owners member
NAGR member
toy $ funds are currently depleted, I must decline a 000 mold at this time, sorry.
ramhunter here
I will take : 1 8 cav #1 buck mold with handles
yukonmarco at gmail dot com..
thank you
Shawnsmc, I'll take one #1 shot. Shawn smc at hot mail dot com. Zip code 95037
"(The Constitution preserves) the advantage of being armed which Americans possess over the people of almost every other nation...(where) the governments are afraid to trust the people with arms." -James Madison
Don’t mean to pour salt in the wound so to speak but all the 00 I’ve ever had my hands on measured closer to .34” rather than .33” . And as to 000 it closer to .36” not .336” which I assume is a typing error . I’d be intrested in 0000 .38” and 00000 .40” . Already cast those two with a two cavity Lee molds and it’s kinda SLOW .
Parker's , 6.5mm's and my family in the Philippines
Added, thanks
Removed, sorry to see you go. Let me know if things change.
Added, thanks. Need your full details to make the job easier when invoicing and shipping happens. See the list, above in the first post, for the details that I need.
Thank you, added
I'm going to stick to the sizing for the #00 from the chart. After lead has been bounced around in the factory, it's going to be all dented, dimpled, etc. And, therefore somewhat difficult to measure as it came from a mold. By staying with the official USA designation, we will be sticking with the traditional size that it SHOULD BE.
With regard to the #000 shot size, that was a quirk of my attempts to do a fast copy and paste, and has been corrected to the .36" per the chart. Thanks for pointing that out.
Anything above #000 buckshot goes well beyond the scope of this group buy, and would become somewhat of a custom one-up kind of mold. The 38 special and 40 cal sizes are special use. I would suggest that you seek out one of the one-up type custom mold makers to make those for you.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
Ed K - (1) 8 cav aluminum shot shell mold, #1 shot size, mvesk at yahoo dot com, 03046 Zip Code
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I like to order two molds, one for reload 4 pellets per layer and one for 3 pellets, both with felt wad or wads without the "paddels".
My calculation for the maximum diameter of one pellet is as followed:
3 per layer: r=[2*sqrt(3)-3]*shell inner diameter = 0.4641 x 0.74 ~ 0.343 I decide 00 Buckshot
4 per layer: r=[sqrt(2)-1]*shell inner diameter = 0.4142 x 0.74 ~ 0.3065
Based on this the minimum shell inner diameter with 0.31 pallets is 0.7484, I guess this pellets will fit too tight. But I am sure that the 0.31 pellets will not fit in any wad with paddels.
Thats why I would prefer a mold in 0.300
I hope my english is good enough for understanding.
Last edited by karlB; 09-11-2018 at 11:54 AM.
The #1 (.031") buckshot mold is the smallest we are making for this buy.
So, I will add you for the #00 buckshot mold, but you'll have to figure something else out for your .300" needs.
I need your disguised email address, and postal code (for tracking details when this ships) to complete your listing in the orders.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |