WidenersRotoMetals2RepackboxGraf & Sons
StainLess Steel MediaInline Fabrication

Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27

Thread: 45/70 brass, which to buy?

  1. #21
    Boolit Master
    Join Date
    Dec 2007
    Posts
    655
    I seldom shoot .45-70 anymore, but have used Winchester brass for at least thirty years. I don't recall ever discarding a case because it was worn out. Seems to last forever with moderate cast loads. I don't anneal.

  2. #22
    Boolit Bub
    Join Date
    May 2015
    Location
    Western,Pa.
    Posts
    32
    I use Starline brass exclusively in my 45-70 and 45-90 with no issues,.

  3. #23
    Boolit Master
    Join Date
    Sep 2016
    Posts
    565
    I had a buddy who loved shooting his stable of sharps rifles. Real dyed in the wool blackpowder shooter.He would only use Remington brass without the crimping cannelure. Said that many shooters felt that the ring was the cause of case necks going down range. I've used Remington without the crimp ring and Federal and have no problems and I use smokeless. I do not full length resize. I figure out the body section of the cast bullet and only size that amount rather than the whole case. Frank

  4. #24
    Boolit Buddy
    Join Date
    Jul 2014
    Location
    Central CA for the time being!
    Posts
    179

    45-70 Brass

    Quote Originally Posted by koger View Post
    Thanks for all the feed back guys, I have never ha any problems with neck's cracking, never annealed any brass either. I have a bunch of Rem/Win/Federal and a few Starline, seems I had read some issues with Starline having too thick a rims on a forum, now to bargain hunt for brass!
    Generally Starline is cheaper directly from the factory. Was searching for some .444 Marlin a few weeks ago and came upon a site https://www.creedmoorsports.com/product/4723/Brass. They were about 8 cents a round cheaper and free shipping if your order is 100.00 or more. Just checked 45-70 and its 43.95/100 and Starline is 48.80/100 (122.00 for 250)but you have to buy 250 cases from them.
    Their shipping was very quick too.

  5. #25
    Boolit Master Drm50's Avatar
    Join Date
    Jun 2016
    Location
    SE Ohio
    Posts
    969
    I haven't bought any 45/70 brass for years. I still have a couple hundred new Win brass pre 2000.
    I have gotten a lot of 1x brass from factory ammo the last 3 years from guys who don't load. I have
    found Win to be the best, Federal second and Rem last. Don't have enough experience with the others to comment.

  6. #26
    Boolit Master
    Join Date
    Jul 2013
    Location
    barry s wales uk
    Posts
    1,506
    I'm a cheapskate whatever's the cheapest ,I don't shoot well enough to notice any difference.

  7. #27
    Boolit Mold
    Join Date
    Sep 2016
    Posts
    1
    I neck size my new Starline brass, and load 45-70, it always goes into the case guage, and chambers without issue...

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check