RotoMetals2Lee PrecisionMidSouth Shooters SupplyTitan Reloading
Inline FabricationReloading EverythingLoad DataWideners
Repackbox
Results 1 to 11 of 11

Thread: WTB 10mm Brass

  1. #1
    In Remembrance
    GRUMPA's Avatar
    Join Date
    Nov 2010
    Location
    Concho Az
    Posts
    2,161

    WTB 10mm Brass

    Looking for 10mm brass, range brass is fine. They don't need to be clean, but they do need to be in somewhat reasonable shape with the primers left in. In the end these are going to be used for 1 of my 300gr 44cal swage projects.

    I'm looking to pay .10ea shipped for them.

    And you need to be patient since I live remote for payment. I go to the P.O. once a week and this week we have rain almost every day. And since that 7 miles of dirt road gets rather muddy I wait till it dries out a bit.

    Looking for 500pcs for starters.
    Last edited by GRUMPA; 08-21-2018 at 08:19 PM.
    Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF

    Annealing Services

    http://castboolits.gunloads.com/foru...php?117-Grumpa






  2. #2
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    Grumpa, I have 72 10mm. Also have lot of odds and ends.
    PM your mailing address and we can talk.
    Ken

  3. #3
    Boolit Master
    Join Date
    Feb 2015
    Location
    Central Iowa
    Posts
    1,427
    Does it have to be 10mm? 40 S&W would be much cheaper and easier and it's basically the same thing only 1/8" shorter.

  4. #4
    In Remembrance
    GRUMPA's Avatar
    Join Date
    Nov 2010
    Location
    Concho Az
    Posts
    2,161
    Quote Originally Posted by reddog81 View Post
    Does it have to be 10mm? 40 S&W would be much cheaper and easier and it's basically the same thing only 1/8" shorter.
    I've used 40cal for that, right now they weigh 250gr in there current configuration. I've used 10mm for 300gr 45cal boolits. Thing is I don't have anymore 10mm with primers in them.
    Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF

    Annealing Services

    http://castboolits.gunloads.com/foru...php?117-Grumpa






  5. #5
    Boolit Bub
    Join Date
    Aug 2018
    Location
    N.W. Florida
    Posts
    48
    I have stone (MAYBE 100) that you can have if you just pay for shipping

  6. #6
    In Remembrance
    GRUMPA's Avatar
    Join Date
    Nov 2010
    Location
    Concho Az
    Posts
    2,161
    Quote Originally Posted by army_doc View Post
    I have stone (MAYBE 100) that you can have if you just pay for shipping
    I'll PM you about those...
    Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF

    Annealing Services

    http://castboolits.gunloads.com/foru...php?117-Grumpa






  7. #7
    In Remembrance
    GRUMPA's Avatar
    Join Date
    Nov 2010
    Location
    Concho Az
    Posts
    2,161
    Back to the first page..
    Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF

    Annealing Services

    http://castboolits.gunloads.com/foru...php?117-Grumpa






  8. #8
    Boolit Bub
    Join Date
    Oct 2014
    Location
    Canton,Ohio
    Posts
    33
    I can finish off however many you need to get 500. Your posted price is good. Let me know and I'll get then ready to ship.
    Thanks,
    Lynn

  9. #9
    Boolit Man blltsmth's Avatar
    Join Date
    Dec 2010
    Posts
    95
    I have 625 Federal, once fired from factory ammo if you are still in need. All brass, most with ejector dings like you would see coming out of a 45 ACP pistol. Pictures available if you would like them. Brass is semi-clean, tumbled in corn cob for a couple hours. That 10 cents each shipped would fit these cases to a "t." Let me know. THANKS!! Don

  10. #10
    In Remembrance
    GRUMPA's Avatar
    Join Date
    Nov 2010
    Location
    Concho Az
    Posts
    2,161
    I now have enough for my project, which......worked rather well. Have 2 ways of doing those, both are slightly different.

    Thank you to all that helped me along, I greatly appreciate the effort.

    Thread is now locked.
    Click to see what I'm doing and have available, this takes you to the VS (Vendor Sponsor) section of the site. Currently..25Rem,30Rem, 32Rem, 35Rem, 257Roberts, 358Win, 338Fed, 357 Herrett, 30 Herrett, 401 Winchester, 300Sav, 221 Fireball, 260Rem, 222Rem, 250 Savage, 8mm Mauser (AKA 8x57), 25-20WCF

    Annealing Services

    http://castboolits.gunloads.com/foru...php?117-Grumpa






  11. #11
    Moderator Emeritus


    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    15,833
    ~~~~~~~~~~~~~~
    “If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
    ― The Dalai Lama, Seattle Times, May 2001

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check