I pick this up on a whim. I can move the turret manually but there appears to be a 1/4 inch hole on the turret. How hard to fashion a handle for this device?
Leadmelter
MI
I pick this up on a whim. I can move the turret manually but there appears to be a 1/4 inch hole on the turret. How hard to fashion a handle for this device?
Leadmelter
MI
Well, you can get a 1/4-20x6" bolt and screw it in the turret. Or if you're handy you can get a 1" plastic ball with a 1/4" threaded hole in it at your hardware store and a 1/4" rod a few inches long and thread both ends...
My Anchor is holding fast!
You might ask Lyman whether the handle you're seeking is the same as the one used on the T-Mag [turret] press. If so, you'll know what to do.
Which Lyman turret press do you have?There is around five different turret presses made over the years.
NRA Benefactor 2004 USAF RET 1971-95
Mine looks old and is painted with the Lyman Orange.
Leadmelter
MI
“I have this old Ford sedan and wonder if I can get parts for it?”
“It’s black.”
You really need to be a little more specific. A picture would help, as would a more thorough description. Then again, you might want to post this whole question in the Reloading Equipment page where this kind of thing is discussed in detail... this page is more for tong tools and Lee Loaders. Just a thought.
"It aint easy being green!"
I have a old T press also and it is not like that is out there like today of Lyman. If I need some parts I see what will need to be done and then go from there. Like I did with my Lube Sizer 450 the handle threads got strip on me and talk with my gunsmith on it and he took care of the problem with me that another part can be made easy after. Like stated need to see photos of what is needed.
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
If it is orange with a black turret then it is the last of then Spar-T line, and it did not have a handle to turn the turret. If there's a hole in the side of the turret, you can thank Bubba for putting it there. Find any bolt as suggested above to use as a handle.
Ken
I used 2ea 5/16 18 x 4" bolts on my Spar T press to turn the turret, works great!
"Masculine republics give way to feminine democracies, and feminine democracies give way to tyrannies.” Aristotle
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |