Reloading EverythingRotoMetals2Inline FabricationWideners
Load DataMidSouth Shooters SupplyTitan ReloadingLee Precision
Repackbox
Page 4 of 23 FirstFirst 1234567891011121314 ... LastLast
Results 61 to 80 of 450

Thread: I could use it box!

  1. #61
    Boolit Buddy

    Flailguy's Avatar
    Join Date
    Dec 2017
    Location
    Bakersfield CA
    Posts
    192
    Glad this post is still going, and the box isn't a bunch of junk!

  2. #62
    Boolit Grand Master Bazoo's Avatar
    Join Date
    Dec 2013
    Location
    Cecilia, Kentucky
    Posts
    6,715
    Im ready to send it back out. First to say they want it and follow with a PM will get it next.

    Claimed Items:
    RCBS 38-148-WC with handles - MattW
    Lyman 55 Powder measure - MattW
    Lee Ram Prime small and large - Camper64
    Lee 50cal-320 mould - Camper64
    Lee 50cal-250 mould - Camper64
    RCBS Partner Press - Rdwarrior
    Lyman 7/8"x14 Adapter - Rdwarrior
    Olight Valkyrie PL-II Pistol light – Rdwarrior
    Lee 500-354-M mould – Rdwarrior
    RCBS .38/.357 Dies - MEW
    RCBS Kinetic Bullet Puller -MEW
    Lee Universal Decapping Die –MEW
    38 special brass x 28 – metricmonkeywrench (28pcs just didn’t seem right- did a little better...)
    Frankford Arsenal Digital calipers - metricmonkeywrench
    Cast Ideal 358-156 PC & GC boolits (358, 163 Gn) – metricmonkeywrench
    Lee .358 148 DC with handles – metricmonkeywrench
    Frankfort Arsenal Kinetic Bullet Puller - Bazoo
    12 gauge bore snake - Bazoo
    Primer pocket tool - Bazoo
    2 sticks of RCBS lube - Bazoo
    2 sticks of 50/50 lube - Bazoo
    Markron Primer sealer - Bazoo
    Lee 356-125-2R - Bazoo

    In the box:
    RCBS 2 Priming tubes.
    Lee .452 Bullet Lubricating & Resizing Kit
    Unknown Shell holders 5, 6, 12, long shank 6
    Ideal 358425 DC mould
    Ideal 451148 SC Round Ball mould
    Lee 90383 456-220-1R SC
    2 cavity angle iron ingot mould (2-2.5# each)
    Cast 356-120-tc PC'd boolits (sized: 356, weight: 123.5 gn, count: 25) x 3
    Cast 401-175-tc PC'd boolits (sized: 402, weight: 181 gn, count: 25) x 3
    Cast 452-230-tc PC'd boolits (sized: 453, weight: 237 gn, count: 25) x 3
    RCBS Chamfer and Deburring Tool 17 to 60 Caliber
    Defiant Mini LED Cable Penlight
    RCBS Powder Funnel
    Cast MP 358-429 PC & GC boolits (sized .358, weight 157 Gn, deep HP, count 25)
    Cast MP 358-429 PC & GC boolits (sized .358, weight 160 Gn, med HP, count 25)
    100 pcs 9mm brass (2 boxes)
    6 assorted 310 dies (unknown use/caliber)
    Lyman X4 and X7 shell holders
    Bariska Rimfire 3x7-20 scope
    200 pcs .38spl brass
    100 pcs nickel 357 brass
    52 pcs .223 range fodder brass
    100 pcs 40 S&W brass
    106 pcs nickel 40 S&W brass
    Lee .41 LC case trimmer pilot and shell holder
    RCBS bench primer handle
    Hornady 45 auto dies, older set with roll crimp seater
    Brownells 1911 grips, full checkered walnut
    311291 bullets, bag of 125
    2 Ash wood loading blocks suitable for 38 spl 30-30 and 45 auto case heads
    Ruger Silicone wiping rag
    Unknown index fingers
    Lee 270 RGB 2 die set, no box
    20 R-P 30-30 brass
    Last edited by Bazoo; 09-27-2018 at 09:13 PM.

  3. #63
    Boolit Master



    Join Date
    Mar 2005
    Location
    Aberdeen NC & Wellington FL
    Posts
    1,210
    I'd like to be next, PM on the way

  4. #64
    Boolit Master



    Join Date
    Mar 2005
    Location
    Aberdeen NC & Wellington FL
    Posts
    1,210
    Received the box, should have it ready to move on by Saturday, I'll post when ready.

  5. #65
    Boolit Master



    Join Date
    Mar 2005
    Location
    Aberdeen NC & Wellington FL
    Posts
    1,210
    I'm ready to send it back out. First to say they want it and follow with a PM will get it next. Post office closed Monday so will be Tuesday before it gets on the move.

    Claimed Items:
    RCBS 38-148-WC with handles - MattW
    Lyman 55 Powder measure - MattW
    Lee Ram Prime small and large - Camper64
    Lee 50cal-320 mould - Camper64
    Lee 50cal-250 mould - Camper64
    RCBS Partner Press - Rdwarrior
    Lyman 7/8"x14 Adapter - Rdwarrior
    Olight Valkyrie PL-II Pistol light – Rdwarrior
    Lee 500-354-M mould – Rdwarrior
    RCBS .38/.357 Dies - MEW
    RCBS Kinetic Bullet Puller -MEW
    Lee Universal Decapping Die –MEW
    38 special brass x 28 – metricmonkeywrench (28pcs just didn’t seem right- did a little better...)
    Frankford Arsenal Digital calipers - metricmonkeywrench
    Cast Ideal 358-156 PC & GC boolits (358, 163 Gn) – metricmonkeywrench
    Lee .358 148 DC with handles – metricmonkeywrench
    Frankfort Arsenal Kinetic Bullet Puller - Bazoo
    12 gauge bore snake - Bazoo
    Primer pocket tool - Bazoo
    2 sticks of RCBS lube - Bazoo
    2 sticks of 50/50 lube - Bazoo
    Markron Primer sealer - Bazoo
    Lee 356-125-2R – Bazoo
    311291 bullets, bag of 125 Trooperdan
    2 Ash wood loading blocks Trooperdan
    2 cavity angle iron ingot mould Trooperdan
    Defiant Mini LED Cable Penlight Trooperdan
    6 assorted 310 dies Trooperdan
    cast MP 358-429 PC & GC boolits Trooperdan
    Bariska Rimfire 3x7-20 scope Trooperdan
    52 pcs .223 range fodder brass Trooperdan

    In the box:
    RCBS 2 Priming tubes.
    Lee .452 Bullet Lubricating & Resizing Kit
    Unknown Shell holders 5, 6, 12, long shank 6
    Ideal 358425 DC mould
    Ideal 451148 SC Round Ball mould
    Lee 90383 456-220-1R SC
    Cast 356-120-tc PC'd boolits (sized: 356, weight: 123.5 gn, count: 25) x 3
    Cast 401-175-tc PC'd boolits (sized: 402, weight: 181 gn, count: 25) x 3
    Cast 452-230-tc PC'd boolits (sized: 453, weight: 237 gn, count: 25) x 3
    RCBS Chamfer and Deburring Tool 17 to 60 Caliber
    RCBS Powder Funnel
    Cast MP 358-429 PC & GC boolits (sized .358, weight 160 Gn, med HP, count 25)
    100 pcs 9mm brass (2 boxes)
    Lyman X4 and X7 shell holders
    200 pcs .38spl brass
    100 pcs nickel 357 brass
    100 pcs 40 S&W brass
    106 pcs nickel 40 S&W brass
    Lee .41 LC case trimmer pilot and shell holder
    RCBS bench primer handle
    Hornady 45 auto dies, older set with roll crimp seater
    Brownells 1911 grips, full checkered walnut
    Ruger Silicone wiping rag
    Unknown index fingers
    Lee 270 RGB 2 die set, no box
    20 R-P 30-30 brass
    Bonanza .45 Colt die set
    Military M1 Garand cleaning kit
    RCBS .221 Rem die set
    18 Oz 40/60 lead/tin solder
    20 rd 6.5x55 brass
    12 rd Norma 6.5 Jap brass
    50 rd mil O.F. .30-06 brass
    16 rd Peters .45-70 brass

  6. #66
    Boolit Buddy
    Join Date
    Feb 2018
    Location
    Iowa
    Posts
    263
    Bump to keep it moving.

  7. #67
    Boolit Buddy


    Join Date
    Apr 2009
    Location
    Princeton, PA
    Posts
    244
    Id like to give it a go... PM incoming

    Sent from my SM-G960U using Tapatalk
    Dignified? I signed up for brave and courageous, not dignified!

  8. #68
    Boolit Buddy


    Join Date
    Apr 2009
    Location
    Princeton, PA
    Posts
    244
    Trooperdan, tried to PM ya back but it says your inbox is full. Lol

    Sent from my SM-G960U using Tapatalk
    Dignified? I signed up for brave and courageous, not dignified!

  9. #69
    Boolit Master tinhorn97062's Avatar
    Join Date
    Jun 2015
    Posts
    705
    Bump...

    I’d like to be next in line.
    I serve Jesus exclusively...do you?

    .45-70 Marlin 1895 GBL
    .30-06 Win. M70

    I finally obtained a feedback post!

    http://castboolits.gunloads.com/show...80#post4182480

  10. #70
    Boolit Buddy
    Join Date
    Jun 2012
    Location
    Douglas Ridge Rifle Club, Eagle Creek, Oregon
    Posts
    219
    Seems like a awful lot of cast bullets are in the box.

  11. #71
    Boolit Master
    1911sw45's Avatar
    Join Date
    Jun 2008
    Location
    Princeton, KY
    Posts
    516
    There is no getting in line. Yes there is a bunch of cast boolits and common brass. I am in contact with the person that has this box. I will be having him remove the common brass and possibly removing some other stuff from the box. He has already told me what he wants to put in the box and there is no room. I was hoping this box would not have turned in to the box as it has so fast. Unless it can stay with the spirit of what the box was originally set out to be, it will be coming to the end here very soon.

    Thank you,

    Adam Cruzen
    1911sw45

  12. #72
    Boolit Buddy
    Join Date
    Jun 2012
    Location
    Douglas Ridge Rifle Club, Eagle Creek, Oregon
    Posts
    219
    Maybe someone should start a box o brass & bullets box.

  13. #73
    Boolit Buddy


    Join Date
    Apr 2009
    Location
    Princeton, PA
    Posts
    244
    OK, the box is ready to go again. As 1911sw45 said, the common brass have been removed to make room. But, I will be posting the removed brass in the Pay it Forward area. It will go to who needs it. Before anyone gets upset, i want to make it clear I will not be using them as "payment" for any item I may want. It will just simply posted to make sure they find a good home and to get the PIF section revived again so to speak. Below is what I was asked to post by the OP...
    Dignified? I signed up for brave and courageous, not dignified!

  14. #74
    Boolit Buddy


    Join Date
    Apr 2009
    Location
    Princeton, PA
    Posts
    244
    PLEASE READ BELOW BEFORE GRABBING THIS BOX!

    I am starting a "I could use it box". I have a box of reloading goodies that needs a good home. It's in a large flat rate box. Must stay in a large flat rate box. Good for where ever a USPS Flat rate box will go. Take what you can use and replace it with something that you don't need any more and you pay the shipping to the next person on that posts "I could use it". You must list what is in the box, so the next person knows what is in there. Keep the box full and past it along to the next person.

    Wait till the receiver gets the box and posts what he/she has taken and what he/she replaced the items with.

    Please fill the box with some items of value. Don't want this to become a box of junk. Make sure you list what you take from the box and what you replace it with.

    Thanks,

    Adam
    1911sw45

    Please keep the common brass and boolit calibres from the box. I had the last guy remove the common calibres.

    Removed from the box:
    100 pcs 40 S&W brass Removed per 1911sw45
    106 pcs nickel 40 S&W brass Removed per 1911sw45
    200 pcs .38spl brass Removed per 1911sw45
    RCBS Powder funnel Removed per 1911sw45



    Claimed Items:
    RCBS 38-148-WC with handles - MattW
    Lyman 55 Powder measure - MattW
    Lee Ram Prime small and large - Camper64
    Lee 50cal-320 mould - Camper64
    Lee 50cal-250 mould - Camper64
    RCBS Partner Press - Rdwarrior
    Lyman 7/8"x14 Adapter - Rdwarrior
    Olight Valkyrie PL-II Pistol light – Rdwarrior
    Lee 500-354-M mould – Rdwarrior
    RCBS .38/.357 Dies - MEW
    RCBS Kinetic Bullet Puller -MEW
    Lee Universal Decapping Die –MEW
    38 special brass x 28 – metricmonkeywrench (28pcs just didn’t seem right- did a little better...)
    Frankford Arsenal Digital calipers - metricmonkeywrench
    Cast Ideal 358-156 PC & GC boolits (358, 163 Gn) – metricmonkeywrench
    Lee .358 148 DC with handles – metricmonkeywrench
    Frankfort Arsenal Kinetic Bullet Puller - Bazoo
    12 gauge bore snake - Bazoo
    Primer pocket tool - Bazoo
    2 sticks of RCBS lube - Bazoo
    2 sticks of 50/50 lube - Bazoo
    Markron Primer sealer - Bazoo
    Lee 356-125-2R – Bazoo
    311291 bullets, bag of 125 Trooperdan
    2 Ash wood loading blocks Trooperdan
    2 cavity angle iron ingot mould Trooperdan
    Defiant Mini LED Cable Penlight Trooperdan
    6 assorted 310 dies Trooperdan
    cast MP 358-429 PC & GC boolits Trooperdan
    Bariska Rimfire 3x7-20 scope Trooperdan
    52 pcs .223 range fodder brass Trooperdan
    Lee .452 Bullet Lubricating & Resizing Kit - Jake
    RCBS Chamfer and Deburring Tool - Jake
    Hornady 45 auto dies, older set with roll crimp seater - Jake


    In the box:
    RCBS 2 Priming tubes.

    Unknown Shell holders 5, 6, 12, long shank 6
    Ideal 358425 DC mould
    Ideal 451148 SC Round Ball mould
    Lee 90383 456-220-1R SC
    Cast 356-120-tc PC'd boolits (sized: 356, weight: 123.5 gn, count: 25) x 3
    Cast 401-175-tc PC'd boolits (sized: 402, weight: 181 gn, count: 25) x 3
    Cast 452-230-tc PC'd boolits (sized: 453, weight: 237 gn, count: 25) x 3
    RCBS Chamfer and Deburring Tool 17 to 60 Caliber
    Cast MP 358-429 PC & GC boolits (sized .358, weight 160 Gn, med HP, count 25)
    100 pcs 9mm brass (2 boxes)
    Lyman X4 and X7 shell holders
    100 pcs nickel 357 brass
    Lee .41 LC case trimmer pilot and shell holder
    RCBS bench primer handle
    Brownells 1911 grips, full checkered walnut
    Ruger Silicone wiping rag
    Unknown index fingers
    Lee 270 RGB 2 die set, no box
    20 R-P 30-30 brass
    Bonanza .45 Colt die set
    Military M1 Garand cleaning kit
    RCBS .221 Rem die set
    18 Oz 40/60 lead/tin solder
    20 rd 6.5x55 brass
    12 rd Norma 6.5 Jap brass
    50 rd mil O.F. .30-06 brass
    16 rd Peters .45-70 brass
    One set of rainproof Midland GXT rechargable FRS/GMRS cammo hunting radios with home and car charger.
    lithium ion rechargeable tactical flashlight battery and charger
    NIB Avanti competition air rifle diopter sight with sling
    Older model trail camera
    5.56 AR platform Chamber brush
    two Civilian Marksmanship Program empty chamber indicators (aka. chamber flags)
    Mil Issue 30rnd AR Mag (used overseas but still in good shape)
    Dignified? I signed up for brave and courageous, not dignified!

  15. #75
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,493
    I'll take the box... there are a few things I could use, but I also have some goodies to add....
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  16. #76
    Boolit Buddy


    Join Date
    Apr 2009
    Location
    Princeton, PA
    Posts
    244
    You got it. PM replied to.

    Sent from my SM-G960U using Tapatalk
    Dignified? I signed up for brave and courageous, not dignified!

  17. #77
    Boolit Master
    metricmonkeywrench's Avatar
    Join Date
    Apr 2016
    Location
    Virginia
    Posts
    1,107
    As the perpetrator, however misguided in intent, of including the "common" brass in the box as a part of my exchange I am calling myself out and want to make this right.

    Adam, Tell me what you want done with the items that I claimed.

    Jake, PM me your address and the cost to ship the brass on the PIF for reimbursement.

    I do not want to be accused of being "that guy" that took advantage of your generosity and did not properly reply in kind.

    George

  18. #78
    Boolit Master
    1911sw45's Avatar
    Join Date
    Jun 2008
    Location
    Princeton, KY
    Posts
    516
    Metricmonkeywrench. That's not what the problem was. The items that was wanted to be added there was no room. So I had him remove the common brass. You are good. You are not "that guy". Just as this box goes forward I put a change on common brass and boolits. It was not aimed at anyone.

    Thank you,

    Adam

  19. #79
    Boolit Buddy


    Join Date
    Apr 2009
    Location
    Princeton, PA
    Posts
    244
    Box is in the mail on the way to NoZombies

    Sent from my SM-G960U using Tapatalk
    Dignified? I signed up for brave and courageous, not dignified!

  20. #80
    Boolit Master
    metricmonkeywrench's Avatar
    Join Date
    Apr 2016
    Location
    Virginia
    Posts
    1,107
    Adam, thank you for your explanation and graciousness, I obviously did not understand the issue completely and took offence to fast.

    Jake, My offer to cover shipping for the brass PIF still stands...

    George

Page 4 of 23 FirstFirst 1234567891011121314 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check