If I get the box again before it's purged I'll claim the zippo hull. Or if someone claims it, I'll forward them a new set of guts.
If I get the box again before it's purged I'll claim the zippo hull. Or if someone claims it, I'll forward them a new set of guts.
When I get it I'll look back and see what's been there the longest and weed some of it out.
Sent from my LM-G820 using Tapatalk
Maybe offer some of the things that gets culled out on the helping hands section for the cost of shipping.
Yeah I didn't go through all the smaller boxes, just grabbed what I the few things I saw that interested me. Also forgot to put on the list that the gas check bags were put into one larger bag to keep them all together. Same with the roundballs. And sorry about the brass, it was probably mentioned earlier in the thread and I missed it or forgot. I double checked just in case and nothing was left on the table where I went through it so nothing got left here.
Sent from my moto z3 using Tapatalk
The box was intact. I dont think another item could have fit inside the box. The form die box items listed as being inside the box was missing. It is going out today to Rp. wb
Received but not opened yet. Except my wife who had to open it to make sure I wasn't buying stuff and claiming it was PIF... Will go through as I have time today or in the next couple days and update.
EDIT: thanks Willow
Sent from my LM-G820 using Tapatalk
Took
450 bushmaster brass
protech holster
35 454 Casull Starline brass looks new
10 Hornady XTP 300 gr.452 boolits
20 460 S&W Mag brass
16 Hornady 240gr XTP boolits
4 Hornady 200gr FTX boolits
30 carbine dies
Scrapped:
Car charger
In the box:
-4 45acp repack boxes
-glenfield 4x15 .22 scope
-barska 4x15 .22 scope
-1 block of gulfwax parafin
-48 WW 230gr Lee TL RN 45
-B-Square No gun smith scope mount for Ruger 22 pistol with bull barrel
-Volquartsen comp for Ruger 22 Pistol with bull barrel
-2 lithium ion rechargeable 123a battery and charger
-Red gun lock
-Uncle Mike's #36 IWB holster. Lightly used.
-AR aluminum cocking
-5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
-7 ea Starrett Decimal tap&drill cards
-5 ea, Metric tap/drill cards
-20 ea-.321 Commercial cast bullets @ 165 gr
-20 170 gr .321 cast bullets sized w/ gas check,
-Uncle Mikes #13 Large scoped revolver holster
-1 US Constitution booklets
-20 308 cases; once fired
100X .011 Al Homemade 30 cal gas checks
42X .011 AL Homemade 44 cal gas checks
43X 44 caliber Hornady Gas checks
8X 32 cal. lead ball (.315) (for slugging?)
6X 50 cal. lead ball (.490) (for slugging?)
12X .240" Hornady #4 Buckshot
-Green AR follower
-2 Starrett catalogs
-Starrett notepad with fractions to decimals to millimeters in back
-4X SMLE 303 Chargers
-5X SKS Chargers
-LEE 10mm case length gauge set
-LEE 357 SIG case length gauge set
-2X AR-15 3 mag pouches.
-Zippo lighter case
-H&K G3 mag
-Herter's wad column gauge
-SPG lube
-6 Garand Buttstock Lube containers (yellow top, brown goo)
-1 GI green boonie hat mosquito net
-1 Orange Lyman Case Lube pad
-1 Herters 44SPL Die set
-1 Brass primer tube (unknown make)
-Couple of MAGPUL stickers
-10X Howard Leight Max Lite foam ear plugs
-Weaver 3B side mount scope base
-Starret electronic 6 in calipers (needs battery)
-50X 30-06 brass (I believe once fired)
-RCBS 30-06 seating die
-100 once fired 9mm brass
-2 AR-15 grips new
-Enfield SMLE front and rear sight
-Fowler vernier caliper like new in case
-25 Speer 38 shot cups (no plugs)
Lyman 6mm rem dies.
Added:
-10 284 eld-M 162gr
-25 451 HAP 230gr
-50+ 224 mix of fmj and so 55gr
-25 224 "green tips"
-50 224 v-max 55gr
-5 380acp repackbox ammo boxes
-8 5.56 repack boxes
-remington 870 2 piece scope mount
- Lee #4 shellplate for pro1000
-2 threaded hex rods to attach case prep tools to a drill
-lee 0.7 powder Dipper
-3 small bags of powder coat. Please don't take all 3 at once.
Regarding the powder coat - There's a good amount of green from an unknown source but works good. This is the same green I included last time I think. There's an equally good amount of orange-brown from SMOKE. A great powder but kinds comes out longhorns orange (so the guys at the range told me). Both of these should be enough co coat tens of thousands of bullets easily. The third bag is black which came from SMOKE as well. It was wet and a little chunky when I used it but it worked fine. There is not very much in this bag but could still easily do 1-2k, maybe more. Please only take 1. I'd like some guys to get it who haven't tried it yet.
I removed the no gunsmith mount and comp for a Ruger pistol, the Lyman TL dies, and the red gunlock because nobody has any interest in them. Might offer them on the PIF page later or put them back in this box next year. Or if anyone has any other ideas??
I tested the 2x 123 batteries and charger, none are good. The charger is going into the trash, batteries will be dropped on the recycling thing at home Depot.
Pretty much what I'm adding takes up less room so the box should be easier to manage. If anyone wants to talk more about the items I removed and wants them back in the box, wants them back, or disagrees then please, let's add it to the discussion. We're all friends here and nobody should be mad or anything.
You guys know the drill. First one who can use it will have it appear in their mail.
Sent from my LM-G820 using Tapatalk
On a separate note, I thought about putting some shotgun wads in to fill up room but I'm not sure how many people load shotgun these days. Does anyone load 12ga? Would you like to see some in the box later?
Sent from my LM-G820 using Tapatalk
I'll take it if still available. PM on it's way.
"Adults are the children and the children are the adults" Jules my wife.
All you need for happiness is a good gun, a good horse, and a good wife. Daniel Boone
Democracy is defended in 3 stages: Ballot Box, Jury Box, Cartridge Box. Ambrose Bierce
A system of licensing and registration is the perfect device to deny gun ownership to the bourgeoisie. Vladimir Ilyich Lenin
Black Rifles Matter
NRA Life Member, SAF Member, GOA Member, TFA Member
I don't load shotgun yet, but I wouldn't think a couple handfuls of wads would be worth the trouble unless you already are using them. I guess folks try different wads and see what patterns better?
Headed to cheeto this weekend.
I have a full bag of wads. The problem is the space they take.
Sent from my LM-G820 using Tapatalk
I got the box today. I'll need a couple of days to go through it add stuff an re-inventory it. Tomorrow I have an anti-bloomberg rally to attend in Clarksville, Tn. Bloomberg is being hosted by Old Glory Distillery. Saturday I'll be out collecting signatures for a petition to make Montgomery county, Tn a 2A sanctuary county. If you live in Tennessee please consider becoming a member of the TFA (Tennessee Firearms Association). We need all the help we can get. https://tennesseefirearms.com/
"Adults are the children and the children are the adults" Jules my wife.
All you need for happiness is a good gun, a good horse, and a good wife. Daniel Boone
Democracy is defended in 3 stages: Ballot Box, Jury Box, Cartridge Box. Ambrose Bierce
A system of licensing and registration is the perfect device to deny gun ownership to the bourgeoisie. Vladimir Ilyich Lenin
Black Rifles Matter
NRA Life Member, SAF Member, GOA Member, TFA Member
I removed the Ruger 22 pistol compensator and mount from the box and planned to maybe list it elsewhere. A member by the name of rbuck351 reached out to me expressing interest. I planned to split shipping cost for the 2 parts but he paid for flat rate shipping anyway. Parts went out to him yesterday. Asked him to post up a PIF in the PIF section here. Those parts have been sent off though.
I don't know if I noted in my earlier post about taking out a mag pouch for at mags but apparently one either didn't make it in the box or I thought I was cool and could use one. I'll hold onto it a little longer until I have time to post it in the PIF section.
Sent from my LM-G820 using Tapatalk
I'm getting the mount and comp for a ruger 22. been watching the I'll take it box for some time but was only interested in these two items so didn't want the hassle of receiving and repacking and sending the whole box of stuff. But, to be fair, I would like to offer on this thread a set of small base dies in either 223, 308 or 3006 for the asking. This is not a PIF. You ask and I send on my dime and you don't need to do a PIF. If no one takes this offer, I'll put up something else.
Thanks to RP- Buck
Good on you, man. That's still a PIF on your part. I never used small base dies before. What do you need them for?
Sent from my LM-G820 using Tapatalk
RP-
We have an auction house in Kalispell that does online auctions once or twice a month. They have a lot of reloading stuff from estate sales and such. Dies are usually grouped in lots of 4 or 5 die sets and normally run around $20/$25 per lot. I don't use small base for dies anything but these came from lots that had dies I wanted. Last year I bought a box of molds and a few handles for $65 or there about. There were 18 molds, some single cav and some double. Have picked up several thousand primers for around $15 per thou. I stop bidding at $20.
Last edited by rbuck351; 03-06-2020 at 05:18 PM. Reason: made mistake
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |