I could use it box!

[1911sw45]

Metricmonkeywrench,
Your ok. It will be fine setting while your away. Thank you sir for claiming it. Enjoy your travels and be safe.

[PHyrbird]

MMW,
We all have lives to live, vacating is important too. You shouldn't be responsible for other's actions when you have no influence or control.
Have a good time. Bring back lots of goodies for U & the box. (we hope)

[metricmonkeywrench]

All, again sorry for the delay, the box is inventoried and ready to go. The inner box was starting split on the bottom pulling away from from the staples. I glued and screwed the separated sides and added some screws all around.

Usual rules first I’ll take it followed up with an address will get it.

Box contents:
-glenfield 4x15 .22 scope
-barska 4x15 .22 scope
-AR aluminum cocking handle
-5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
-6 ea Starrett Decimal tap&drill cards
-4 ea, Metric tap/drill cards
-Uncle Mikes #13 Large scoped revolver holster
8X 32 cal. lead ball (.315) (for slugging?)
6X 50 cal. lead ball (.490) (for slugging?)
12X .240" Hornady #4 Buckshot
-Green AR follower
-2 Starrett catalogs
-Starrett notepad with fractions to decimals to millimeters in back
-H&K G3 mag
-6 Garand Buttstock Lube containers (yellow top, brown goo)
-Couple of stickers
-7 Howard Leight Max Lite foam ear plugs
-Weaver 3B side mount scope base
-Starret electronic 6 in calipers (needs battery, replaced batteries, display issues)
-2 AR-15 grips new
-Enfield SMLE front and rear sight
-Fowler vernier caliper like new in case FLOATING AROUND IN CASE, BLUE PLASTIC CHUNKS IN IT, ADDED PACKING
-10 284 eld-M 162gr
-3 380acp repackbox ammo boxes
-6 5.56 repack boxes
-remington 870 2 piece scope mount
- Lee #4 shellplate for pro1000
-2 threaded hex rods to attach case prep tools to a drill(Lee parts?)
-1 LEE Loader 12 gauge whack a mole sizing die.(not whole kit,just the sizing die)
-1 RCBS # 38 Shell Holder
-1 LEE 270 case trimmer
-1 GSG 5/GSG 522 22 rd magazine
-1 Box 50 CT. NEW Speer Hot-Core 375 Cal (.375") 235 Gr HCSP Boolits
-Bag of 24 M16/M4 shoot thru plastic muzzle covers. (we (us Grunts)used these in the jungle to keep rain and crud out of barrel) Please take 1 so others can get one.
-1 S&W 14 rd mag (I think it's for a SW9VE)
38 Speer 35cal, 250 gr Boolits
1 small bags of 308 boolits
Leather case with assorted forceps and scissors
3” padded vise jaws, new
Small box of 416 cal Boolits
S&W J frame holster NOT J FRAME labeled 21 86, seems like an auto holster
2 small bags Eastwood Henry Light Blue powder
1 mostly full box of Hornady .277 130gr Interbonds
Wilson 7mm mauser case gage
LEE 3 hole die holder.

What I added:
Sm Flambeu green funnel
1 Bag Berger .22cal 175g VLD bullets
1 Bag .40 cal frangible bullets
1 Bag .38 frangible bullets
Lyman 338 Win-Mag die set with inst/wrench no box
2 Herters steel OAL gauge plates


What I took:
RCBS 30-06 seating die
2 sticks of solid, Blue Angle lube
1 LEE casting dipper
Lead ingot
2 5.56 repack boxes
Brass primer tube (unknown make)

I couldn’t fit back the two bags of brass in the box no matter how many times I tried, will sit on them until the brass & bullet box comes my way or send out as a one-way helping hands later on:
1 Large bag 357 Sig range pickup brass (unprocessed)
1 bag of processed 9mm brass

[metricmonkeywrench]

Friday bump so I can get it out Saturday morning

[Scrounge]

All, again sorry for the delay, the box is inventoried and ready to go. The inner box was starting split on the bottom pulling away from from the staples. I glued and screwed the separated sides and added some screws all around.

Usual rules first I’ll take it followed up with an address will get it.

Box contents:
-glenfield 4x15 .22 scope
-barska 4x15 .22 scope
-AR aluminum cocking handle
-5 ea Fluke P/T Chart of refrigerants (all of them) pressures & temps
-6 ea Starrett Decimal tap&drill cards
-4 ea, Metric tap/drill cards
-Uncle Mikes #13 Large scoped revolver holster
8X 32 cal. lead ball (.315) (for slugging?)
6X 50 cal. lead ball (.490) (for slugging?)
12X .240" Hornady #4 Buckshot
-Green AR follower
-2 Starrett catalogs
-Starrett notepad with fractions to decimals to millimeters in back
-H&K G3 mag
-6 Garand Buttstock Lube containers (yellow top, brown goo)
-Couple of stickers
-7 Howard Leight Max Lite foam ear plugs
-Weaver 3B side mount scope base
-Starret electronic 6 in calipers (needs battery, replaced batteries, display issues)
-2 AR-15 grips new
-Enfield SMLE front and rear sight
-Fowler vernier caliper like new in case FLOATING AROUND IN CASE, BLUE PLASTIC CHUNKS IN IT, ADDED PACKING
-10 284 eld-M 162gr
-3 380acp repackbox ammo boxes
-6 5.56 repack boxes
-remington 870 2 piece scope mount
- Lee #4 shellplate for pro1000
-2 threaded hex rods to attach case prep tools to a drill(Lee parts?)
-1 LEE Loader 12 gauge whack a mole sizing die.(not whole kit,just the sizing die)
-1 RCBS # 38 Shell Holder
-1 LEE 270 case trimmer
-1 GSG 5/GSG 522 22 rd magazine
-1 Box 50 CT. NEW Speer Hot-Core 375 Cal (.375") 235 Gr HCSP Boolits
-Bag of 24 M16/M4 shoot thru plastic muzzle covers. (we (us Grunts)used these in the jungle to keep rain and crud out of barrel) Please take 1 so others can get one.
-1 S&W 14 rd mag (I think it's for a SW9VE)
38 Speer 35cal, 250 gr Boolits
1 small bags of 308 boolits
Leather case with assorted forceps and scissors
3” padded vise jaws, new
Small box of 416 cal Boolits
S&W J frame holster NOT J FRAME labeled 21 86, seems like an auto holster
2 small bags Eastwood Henry Light Blue powder
1 mostly full box of Hornady .277 130gr Interbonds
Wilson 7mm mauser case gage
LEE 3 hole die holder.

What I added:
Sm Flambeu green funnel
1 Bag Berger .22cal 175g VLD bullets
1 Bag .40 cal frangible bullets
1 Bag .38 frangible bullets
Lyman 338 Win-Mag die set with inst/wrench no box
2 Herters steel OAL gauge plates


What I took:
RCBS 30-06 seating die
2 sticks of solid, Blue Angle lube
1 LEE casting dipper
Lead ingot
2 5.56 repack boxes
Brass primer tube (unknown make)

I couldn’t fit back the two bags of brass in the box no matter how many times I tried, will sit on them until the brass & bullet box comes my way or send out as a one-way helping hands later on:
1 Large bag 357 Sig range pickup brass (unprocessed)
1 bag of processed 9mm brass

I could use it.

Bill

[Bantou]

Man I’m glad to see this up and going again.


Sent from my iPhone using Tapatalk

[metricmonkeywrench]

The box will be off to Scrounge in the morning.

**Update- Box went out this morning**

[Scrounge]

The box will be off to Scrounge in the morning.

**Update- Box went out this morning**

Arrived yesterday! Sorry to report that the Starrett #721 Calipers are toast. Put new batteries in them, nothing happening. Cleaned contacts, etc., no joy. Will be leaving them in the box with the new batteries, someone with more organization and electronics skills might be able to fix it, though the consensus in the machining community seems to be it's cheaper to buy a new one. Starrett no longer repairs them. Be probably Friday before I'm ready to send the box on it's way.

[metricmonkeywrench]

Just a note to keep the books clean, on my turn with the box I retained the bags of .357 Sig and 9mm Brass to be given away at another time.

The bag of 9mm Brass, plus some from my collection of range pick ups, was given to a new reloader locally this morning to get him started.

Still need to get the .357 SIG brass out...

[1911sw45]

Copy Good deal.

[nwfdub]

I could use it.

Sent from my SM-S727VL using Tapatalk

[metricmonkeywrench]

The slate is clean, the 357 Sig brass was shipped off to Chris S who in turn posted PIF.

On self imposed time out on the box for a bit...

[No_1]

What’s the status of the box? Is it still in circulation and if not who has it?

[nwfdub]

What’s the status of the box? Is it still in circulation and if not who has it?

I had requested it from @Scrounge ........ Still waiting.

Sent from my SM-S727VL using Tapatalk

[Rp-]

I had requested it from @Scrounge ........ Still waiting.

Sent from my SM-S727VL using Tapatalk

Make sure you PMd him your info in case you haven't already. If you have then maybe PM him again.

Sent from my LM-G820 using Tapatalk

[nwfdub]

Make sure you PMd him your info in case you haven't already. If you have then maybe PM him again.

Sent from my LM-G820 using Tapatalk

Indeed. PM on the 5th, again the 17th. Latest was Friday morning. His response "Hoping now to have it ready to mail Monday, but not betting, and not advising holding breath waiting, either."

Sent from my SM-S727VL using Tapatalk

[1911sw45]

Just send a pm to him asking the status.

[Scrounge]

Just send a pm to him asking the status.

You aren't the only one asking, so I'm answering here instead of individual PM's. I'm trying to put it back together with some good stuff, since I've taken several things out. I've missed several of my own deadlines here recently, so hesitate to put out another one just yet, but it will be out sometime this month. Ain't a lot of month left. SWMBO and I both have chronic health issues. Hers are worse than mine, and we've had our own COVID-19 scare here, fairly recently. Test was negative, so we're trying to catch up on a bunch of stuff. Among other things, I had to cancel one of my appointments to get my back worked on to reduce or eliminate severe back pain. The 2nd appointment was supposed to be the 31st of August, now that's the 1st appointment. She is looking at back surgery and a hip replacement.

The box was pretty well stuffed. I've taken several things out, so it's not quite as bad, but I think I'm going to have trouble getting in all the goodies I need to put in there. The bulkiest item is the holster. If someone wants that, specifically, I'd be happy to ship it to them by itself, just to have the space. It is an Uncle Mike's Sidekick 13 Scoped vertical shoulder holster. Doesn't look like it's ever been worn, though the buckle on the inside of back anchor is rusty. I don't have anything near big enough to fit it, and I think even the Dan Wesson .44mag 8" HVR bbl I used to have would get lost in it. It will fit in a SFRB by itself.

Bill

[nwfdub]

You aren't the only one asking, so I'm answering here instead of individual PM's. I'm trying to put it back together with some good stuff, since I've taken several things out. I've missed several of my own deadlines here recently, so hesitate to put out another one just yet, but it will be out sometime this month. Ain't a lot of month left. SWMBO and I both have chronic health issues. Hers are worse than mine, and we've had our own COVID-19 scare here, fairly recently. Test was negative, so we're trying to catch up on a bunch of stuff. Among other things, I had to cancel one of my appointments to get my back worked on to reduce or eliminate severe back pain. The 2nd appointment was supposed to be the 31st of August, now that's the 1st appointment. She is looking at back surgery and a hip replacement.

The box was pretty well stuffed. I've taken several things out, so it's not quite as bad, but I think I'm going to have trouble getting in all the goodies I need to put in there. The bulkiest item is the holster. If someone wants that, specifically, I'd be happy to ship it to them by itself, just to have the space. It is an Uncle Mike's Sidekick 13 Scoped vertical shoulder holster. Doesn't look like it's ever been worn, though the buckle on the inside of back anchor is rusty. I don't have anything near big enough to fit it, and I think even the Dan Wesson .44mag 8" HVR bbl I used to have would get lost in it. It will fit in a SFRB by itself.

Bill

Well I would love to say the box arrived. Alas I must say Scrounge is a deadbeat. One month ago today, a long month at that, I requested the box. Six weeks ago he received the box. Quoting his post he put another deadline that passed almost a week ago.

I have been following his movements on the forum. He has had time to post each of the last few days. In my mind, that is time that could have been spent printing a label. It's the age of covid, you don't even have to leave your home to ship. The really sad part is I live about a six hour drive away.

So I don't buy any of his excuses. I would never throw my wife under the bus. Clearly his priorities to commitment are askew. I'm done with trying to get it from him. Anyone else cares to try, feel free.

And for the record I check my informed delivery daily. So I know he has yet to ship it out. I just let it go until today for the benefit of doubt. In summation a word comes to mind, PATHETIC!

Sent from my SM-S727VL using Tapatalk

[1911sw45]

I want the box sent back to me. I will be pming you with the address.